Batboard

PriorityOne

Nice V8000. I love that little radio! I stuck mine in the factory armrest/console in my 02 exploder and couldn't be happier with it. 75 watts with the VHF public safety band TX modification.. you cant beat it. Nice install, I would loose the PI sticker though. Im more for the what the hell is that ?...

PriorityOne

yea pretty much betting the battery is crap. Especially with the new load on it from the lighting. I'll test the amp output and notify the customer of the findings. This coupled with the fact he told me that a month before the install he went to vacuum his truck and in the five mins it took he found...

PriorityOne

Fuse tap from drivers side fuse box, 20A radio/ignition fuse. All components are pulling very little through the sense wires, as they all have built in relays these days. I take a look at it tomorrow, I believe the problem is dirty battery terminals, as well as the fact that it is old. I'll clean an...

PriorityOne

Just did a 04 blazer, and customer is reporting some issues and I'm looking for some insight here. Installed 4 HAW's, 4 TIR3's in grill, 2 TIR3's in rear tint, a Slimlighter above rear view mirror, and a siren. Power directly from battery, with a fuse tap for ign/acc control. He says his overhead ou...

PriorityOne

How do you get rid of the priority channel /scan beep on a CDM1250/1550 mobile? It's annoying the crap out of me. I can't seem to find it in the software.

PriorityOne

I have a VHF Spectra with A9 head and expanded board. Model # T83FWA7HA7AK, I'm wondering if this will do the 25 khz spacing?

PriorityOne

M&W Communications - Flemington NJ 908-788-6050

PriorityOne

Get a Trunk Lid Mount and use it on the hood opposite the AM/FM. My antenna never gets noticed and its not permanent.

PriorityOne

Use trunk-lid mounts by antenex mounted to the corners of the hood. bend the antenna slightly at the base to give it that straight look. Ive done this on my pickup and they look and work great, especially if you use the black ones with black antennas.

PriorityOne

10 pounds o shi* in a 5 pound bag... hmmm, no just kidding. Seriously though all this in a K car? sounds like more trouble than its worth

PriorityOne

The only reason i programmed P1 and P2 as Ch up/down is because the arrow keys were not working. That still didnt fix it though. As far as resetting the radio multiple times, do u mean after dumping the codeplug you cycled the power multiple times? or you programmed it several times?

PriorityOne

Thanks i sent it to ya

PriorityOne

Well I put the 16 freq's into a zone assignment and checked over a few more things and the damn radio still only displays ch1 and will not switch from that or access the menu. Im really confused now...

PriorityOne

I just plugged a few freq's into a new CDM 1250, and when it reset it displayed the first channel i put in. When I went to press up or down the radio gives that error beep. I went back into RSS and saw nothing to program the front buttons except the P1, P2, etc so i made P1 ch up and P2 ch down, pro...

PriorityOne

Gently pry at the plastic trim with a flathead, be carefull though. Under the trim will be 2 bolts that remove the brackets and the radio. Its very simple now, they realized that nobody really cares about stealing stock radios anymore.

PriorityOne

Tell me what you guys think?...I spec them the following: Whelen Dash-King Double Head Remote Strobe Reinstall exsisting Spectra A9 & A7 units with DEK sirenbox, etc. from current jeep fleet into new fleet. Wait I thought you were in this as an installer to make money right? So why would you ju...

PriorityOne

Glad to see the Sho-Me worked out for you. They are nice little lights for auxillary lighting.

PriorityOne

Correct, they are steady burn (without flasher) with positive 12 volt wire and ground wire coming out the side, If I remember what it looks like. You could make them "studder" 3 or 4 times before they stay steadyburn with one of these . If you need something with the wire dead center in th...

PriorityOne

yeah uh.. no offense, but that was the longest post I've ever seen to ask one question! But these lights are good for 3rd brake light replacement and they are thin and surface mountable. I replaced mine with one and it packs a punch.

PriorityOne

tvsjr wrote:You might consider adding some lighting as well (covert strobes, potentially.) Nothing like a few disco lights to make a skel a bit nervous.

tvsjr You must be from New York, thats the only plave Ive ever heard the term skel !

PriorityOne

yes ive nearly pooped myself when ive accidently hit the panic button on the keyless entry. Plus EVERY alarm on the market sounds the same so the air-horn is nice and distinctive

PriorityOne

cell phone cd's jump pack they missed the two astro saber 3's and bc250d on the floor Sounds like kids... probably thought they might score some drugs outta the jump pack too, would have loved to see the dissapointed look on their faces when all they found was wound-dressings and oxygen supplies. T...

PriorityOne

OK here we go again guys. I like this Dodge Charger a hell of a lot better then the magnum though. This was seen at the 2005 New York International Auto Show... http://www.autoshowny.com/vehicle/images/2005/Dodge_ChargerPolice_2_lg.jpg http://www.autoshowny.com/vehicle/images/2005/Dodge_ChargerPolic...

PriorityOne

Use a trunk lid mount on the hood like this. Looks better than those "L" brackets and obviously does no damage to your vehicle.

PriorityOne

the other side of the "camp-on" feature is what I am actually seeking, which is the radio besides letting you know if the channel is available for usage, lets you know that the repeater is within range of you. The Kenwoods would let out a constant tone when you PTT until it was 1) clear fr...

PriorityOne

Yeah thats fun for about a week, then you'll wish you didn't have any sounds coming from that radio

PriorityOne

ok thanks guys, yes it was a LTR trunked system.

PriorityOne

Is there a programming option that will offer a sidetone of some sort that will signify when a HT-750 or 1250 is within range to a repeater when keying up? I saw this used with a Kenwood system and wondered if Motorola had the option too. The portable would beep when you keyed up until it successful...

PriorityOne

LOL! but just think, you can set the cruise control for 80 mph and with the siren blarin' you wont even have to slow down or adjust your setting. I thought the CV's were positive for horn ring though.

PriorityOne

how many switches would i have to use if i wanted all tones? Well... if you wanted to wire all the tones to the horn ring you would need to isolate each tone going into the horn ring by using a multiple position switch or use a switch for each tone. One downside of multiple switches is that you'd w...

PriorityOne

I did it by taking the horn 12-volt+ and putting it on the desired tone input in the siren (airhorn, wail, hyper). The color and location in the steering column of the horn wire is always different in every vehicle, so I usually locate the wire coming into the horn itself in the grill or bumper, dis...

PriorityOne

I have a Install scheduled for a 2005 Ford F150 Install for the beginning of next week. I need some information because I have never even seen one up close. Will probably need: Good place for ignition point strobe mounting location in headlights, reverse lights, and tailights Mounting locations for...

PriorityOne

Federal Signal makes models 460L and 660L that will flash LEDs and Strobes simultaneously or alternating. To get Talons or TIR3's to flash at the same rate you can set them to steady-burn and flash them from this power supply

PriorityOne

In flat mode, it'll transparently repeat whatever comes in, although the level will be somewhat lower. An incoming PL deviation of 750Hz will come out at approx 400-500Hz. OK thanks, I guess flat mode is what I want to try. I just want the repeater to repeat any PL and keep it the same on the way o...

PriorityOne

So, if any carrier or PL can come in if I remove the RX side, would it remain the same in the way out? Ex: users with a DPL of 364 would get repeated with a 364 and users with a DPL 754 would stay 754?

PriorityOne

I have a radius 1225 repeater, and Im wondering if it is possible to have the unit repeat my frequency without a PL. The idea is to have 2 sets of users with different PL's able to access this repeater without hearing eachother. Obviously I know that only one party can TX at a time. Anyone know if t...

PriorityOne

2nd that, nothing even comes close to the Talon in price and light output. Plus its the same price for any color.

PriorityOne

Very nice indeed, but I too agree that the Talon should be up above rear view mirror instead of on the dash. Kinda defeats that stealth look you've achieved with the TIR3's in the grill. Overall very lightsexy!

PriorityOne

yea, I think it's a bad idea too. Something about a station wagon with a lightbar on it that's not really too intimidating.

PriorityOne

That's right, if you haven't already heard Dodge will be making a 2006 year Dodge Magnum Police Package, that has sparked up interest in many cities PD's already. NYPD announced they will be joining this crowd, I guess they had enough of those Impala's. Check it out!

PriorityOne

sounds nice, get some pics posted

PriorityOne

A real sweet supply is the Nova RPM 690. It features Random Pattern Mapping, which randomly selects strobe head and pattern combos resulting in the most attention getting strobe display you can imagine. The pack continually changes pairing of bulbs and doesnt repeat the same combo for minutes. They ...

PriorityOne

The connectors are called AMP connectors and are not proprietary to whelen. They can be found at electronic supply stores, however not at RadioShack.

PriorityOne

The entire install is completley covert. No lights are visible until turned on. The LED in the switches is for illumination at night with a little lightsexyness added to it. The switches are standard SPST rockers. The "trunk-lid" antenna mount on the hood lip is the way to go on these truc...

PriorityOne

Personally I see nothing wrong with using this unit for public safety purposes. Icom has made an excellent radio and the mod to TX on public safety freqs is made publicly available, and Icom doesn't really seem to care. On top of this the application is for a 100% volunteer EMS worker, and when comp...

PriorityOne

Recently did a install on a brand new 2004 Ford F150 SuperCab. http://www.geocities.com/priorityonestrobes/f150

PriorityOne

Price, would be my determining factor, seeing how there all pretty much the same

PriorityOne

just put the lights in the tint, it'll work fine... your not running command at a international airport or anything!

PriorityOne

Their not any harder to install than domestic cars would be, but they require a ground-side switching wig-wag module. These can be bought from Galls and others. They also provide a database of cars that require this type of module, so make sure you need it first, because not all Japaneese cars need ...

PriorityOne

Good choices for the undercover covert look. I have used all three products and would definatley recommend them all. The TIR3 license plate bracket is something I have havent got a chance to see in action yet, but it looks good. The Able2 siren is good, I use one with their 100w slim speaker and it ...

Search found 85 matches

2004 Blazer

Spectra Question

trouble prog. CDM 1250 buttons

Repeater and sidetone ?

Re: Any Info? 2005 Ford F150 Install

1225 Radius Repeater Question

HEMI cop cars?

2004 Ford F150 install