Batboard

glock318

This may be covered somewhere else i searched but came up empty except for a little info on the apx 7500. I was wondering what the micro sd slot on the back of the 05 control head is used for? anyone?

glock318

Hmmmm... Thanks for the info, what if I go with 2 of them? I know I've seen them with 2 elements being used. Anyone have a data sheet on one so I can make a harness? Or is there a way to correct the mismatch?

glock318

Great thanks, sorry I would have given you this one but I cut it yesterday I have the lower half still if you need it but the top half I took apart and cut on leg off of it.

glock318

Any way to use a single element off a db-224 a for TX on a Short distance repeater vhf (154)? will there be an impedance mismatch if i just cut the current harness at the splitter and crimp an n female on and connect it into 1/2 hardline 50 omh to the repeater tx side? any suggestions? Thanks

glock318

I recently Flashed a astro ready 1meg 12.5 VHF astro spectra 110w for IMBE operation. I saved all the tuning data and it seems that I have an issue receiving and transmitting any digital signal. It transmits and receives analog fine. But from what I under stood it may need tuning for the tx side but...

glock318

I now have firmware to support 9600.....any body know where I could find s record or a codeplug

Thanks, PM I'll make it worth it.

Thanks

glock318

Hello, I was looking for a s-record for the xts 3k mIII 800mhz Right now I have the 500008-080400-9 flash I was trying to find something with the q361 option (9600) my current firmware is h 04.01.05 n 06.03.02 I wasnt sure what firmware ver was need to make the 3600 and 9600 work together? I also ha...

glock318

Hello

I was trying to figure out how to force a codeplug with the astro spectra rss or cps i have both.
I've searched the board and havnt found much about how to actually do it. Pm me or email me at tip690 @ hotmail.com

Thanks in advance! Josh

glock318

Hello
I was trying to find a astro spectra 800mhz s-rec
model # D04wf9pw4an
R 110401
N 070316
cntrlhead 31 (its the W4)
flash 100004-000000-4
or something close

pm
Thanks

glock318

Hello
I was trying to find a astro spectra 800mhz s-rec
model # D04wf9pw4an
R 110401
N 070316
cntrlhead 31 (its the W4)
flash 100004-000000-4
or something close

pm
Thanks

glock318

for got model
HO9UCH9PW7AN

glock318

I also was lookin for XTS 3000 MODEL 3 800MHZ R04.01.05 DSPN 06.03.02 EMC r02.11 KG1 DES-XL FLASH 100008-000000-0 I have it in .cpg format but was tryin to lab it and need a older ver of the code plug, any body know how to edit a s record? like I said B4 I will be more than happy to paypal. Thanks a...

glock318

please please

glock318

HEllo one of my xts has a major problem :-D I was tryin to find a older ver codeplug for a xts 3000 800mhz H09UCF9PW7BN R07.02.02 DSP 07.03.10 flash c 1000040000004 one that can be read in a older rss or the D ver 3.4 I have currently use cps ver r05.00.02 and need to revert back to dos. Can anybody...

glock318

hey sorry it took so long to get back the exciter # is X131AB
and the reciver # is TFD6512A

thanks so much!

glock318

I have no idea thats what was on it when i got it they said test freq.
Im licensed on 155.52 and 154.710
ill post the exiter and the reciever part numbers later on today..thanks again

glock318

Thank you for correcting me ! How kind.....Why is it weird that I have a job that alllows me to have money to spend? like I said Im only 21 I have no bills, my aprt rent and truck payment, and school thats about it. Well I have orderd both S. manuals for the purc and quantar it takes them 2 to 4 wee...

glock318

O and I know the link when u click it says quantar rss ver 10. ITS NOT RSS!!!!!!!! Last time The word RSS came out i got a warning....lol
Thanks again!

glock318

Hello First off I wanted to tell you guys yall are the best! Im only 21 and have been into radios since i was little so ever since I have been able to work i have been spending my $$ on radio stuff. I built a 220ft Rhon 44g tower on the highest point within 100miles and Im currently (Licensed- Comme...

glock318

Thanks so much! It worked so I finally got to see what the alarm was. It says synth out of lock. But the actual synth had a led on it that light up when its out of lock. Any suggestions? Thanks! ~Josh~

glock318

Thanks guys!! I knew yall would come through!!!! I'll try that this afternoon, Thanks again! ~Josh~

glock318

Hello.

I had a quick question, I bought a vhf purc 5000 with the adva controler as is and it is pasword protected, and way around it? rss or....any link to any info about the purc would be greatly appriciated. I havnt had much luck finding anything on the web. Thanks a million! ~Josh~

glock318

I was wondering if any body here had any knowledge of hooking a IDA corporation RLC and a LTI in to a Kenwood tkr-750 or a tkr-850, Im pretty familiar with the 750 & 850 but I wasnt sure what options to setup in the aux output and if the rlc needed programing, Any help would be greatly appriciat...

glock318

Thank you all for the support! Thanks again Josh

glock318

What I have is a Kenwood tkr740 100w, sinclair BP,BR. freq 154.83, 153.865 ,7/8 commscope, andrew 4bay dipole, it is mounted on a 699ft tower at 400ft. the tower site evel. is the highest in the area. When you all refer to (1/4 wave shorted stub to ground) what exactly are yall talking about? Thanks...

glock318

Hello,

Just checking to see what the best vhf 140-174 100w lightning coax protector is. I need something that is very dependable. Thanks in advance. Josh

glock318

Thanks I'll check them Thank You

glock318

Hello, I just recived a 110 watt vhf spectra from a fellow that had a kenwood tk-790 100w, and a vhf spectra 110w mounted in his truk, He had the antennas 1/4 wave spaced about 6" apart on the roof. I dont know how long he had it like that but , He said that he started to notice that he could n...

glock318

I use whelen in All my jobs and have had very few problems. They have an Great warranty. They will repair or replace most anything that happen to them. I would defentley Go with whelen. The bulbs range from about $20-34. $3o with the strobe cable 15ft.

glock318

Hello, I was wondering if there was any to to set the keys on the a-7 (DTMF) keys you know the 1234567890 to go to a specific zone, like on a s9000 control head? On a s9000 you can set like key one to go to mode 1 and key to to go to mode 2 and so on, I did not see that option in the A-7 section of ...

glock318

Hello, I was wondering if it was possible to turn a 800mhz spectra in to a vhf? I have a useless 800mhz conv only, and i have several parts to a vhf spectra (45w) I have the "codeplug " and a board that says "VHF", I know i'm missing something else, I was hopeing somebody could t...

glock318

I just wanted to let you all know that I have converted it, Thanks to JOSH. I really appricate Your time Thanks again! also thanks JAYMZ very helpful link!

glock318

Hello, I was wondering if any body knew how to convert a spectra 110w vhf A9 to a A7 when I go to the programming menu It will just skip over the s9000 it will not let me change it. If any body know how or could possibly so it for me, I know it would change all the names to a mode number I guess I w...

glock318

thanks for all the replies I really appricate it! I have some well about 15 andrew 7/8 coax hangers mabye they will work. what would you reccomend? thanks, Josh

glock318

I had a quick question, mabye some one could help. I am going to put up another site "qucik and cheap" I have a tkr-750 that has been lying around and I am going to put it up for I guess for a back up or voter site. I already have a vhf system on a 527' tower. I have some property that I h...

glock318

Bump anybody mabye Thanks

glock318

Yes thanks you very much! Its works great! If you ever need any thing just let me know! I will get you that vhf astro codeplug around monday! thanks again!

glock318

Thanks! would you happen to know the latest ver of the lab? Thanks!

glock318

Whem I go into the rss and try to try to pick the control head type it just skips over. The heas type is s900e thats all it will say it will not let me change it. Thanks, Its a black label radio so if that makes any diffrence. Thanks!

glock318

Hello is there any way to change the heads out? Thanks in advance

glock318

Sorry XTL5000

glock318

Hello I have looked every where for a programming cable for the xlt5000 I tried a guy on ebay but no luck, If any body here knows of an aftermarket maker please let me know or if any body has the diagram for it. Thanks in advance! If not I guess I'll sell my "arm" for motorola cable.

glock318

Thanks! I'll Try that!

glock318

Was checking to see if any body "here" was familier with the ida logic repeater controller's. I have a tkr-850 and wanted to put a trunked interconnect and a controller on it I have a logic controller and an interconnect, I was trying to figure out what all do i set up in the software for ...

glock318

I had a quick question "I hope" how hard is it to convert a w4 to a w7, What all would have to change? Thanks in advance! Josh

glock318

Thanks, Really appricate it, Thanks again for your time! Josh

glock318

Thanks I have 3 ,7/8 andrew ground kit for the coax, My freq is in the 154 range how much of a deffrence will it make if i use one of the andrew t arrestor i have for 800-2200mhz, I know it will make some noise but how much will it really make?

glock318

Ok, bump the last thing i said. I will let you know what i have you let me know what you would recommend. I have a 340' tower with a vhf celwave dipole on the top and i have a hard line 7/8. The dipole celwave has a uhf female connector on it, My duplexer has a N female in it. so what would you reco...

glock318

So do what type connectors do you recommend The
DIN. thanks

glock318

Hello I was going to see if any body knew of a really good arrestor for vhf I guess with N connectors or uhf either one. I have several new Andrew arrestor plus "t" series but all of them are for 800-2200mhz. if any of you all know where i could get one or could just let me know what to lo...

Search found 52 matches

XTL 5000 O5 MICRO SD SLOT?

Re: DB-224 single element

Re: DB-224 single element

DB-224 single element

VHF Astro Spectra IMBE issue

Re: S-rec request Xts 3k MIII 800mhz

S-rec request Xts 3k MIII 800mhz

Help forcing a codeplug

Looking for astro spectra s-rec

Asrto Spectra 800mhz S-Rec

Re: xts 3000 codeplug

Re: xts 3000 codeplug

Re: XTS3000 Fail 01/92

xts 3000 codeplug

Quantar HELP!!!

Purc 5000

Kenwood tkr-750 question

Vhf Public Saftey Lightning Protector

Spectra VHF Help

Spectra A-7 control head question

800mhz spectra to a vhf spectra

Spectra A9 to A7

Coax Question

spectra a9 to a7

Xlt 5000 cable

Ida controller and kenwoods

Spectra w4 to w7

Lighting Arrestor