Just wondering if anyone has experienced the same problems we are with our Minitor IV pagers. We have low band 42-50 MHz 2ch pagers that we received in early 2004.
The pagers alert fine but when you push the reset button they almost never reset. You hear the static when the reset button is pressed but they only go back into selective call half the time. Sometimes it requires several presses of the reset button.
Another thing they do is for no reson they go into monitor regardless of where the selector swith is set. For example if i leave my pager in A-selective call it for no reason out of the blue will just go into scan which is in position D.
Again, this is happening with more than just my pager at least five. Anyone else experience this or heard of a firmware update/fix?
Minitor IV Issues
Moderator: Queue Moderator
I hate to tell ya, but the pager is just a piece of garbage. Send it out for service and it will come back working again... for a while. 6 months later, repeat the process or buy a Minitor V.
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
-
- Posts: 311
- Joined: Tue Dec 06, 2005 9:47 am