Narrowband in Radius m216, maxtrac mobiles

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
cduda
Posts: 200
Joined: Sun May 21, 2006 9:39 am
What radios do you own?: GP300, HT1250, CDM1250

Narrowband in Radius m216, maxtrac mobiles

Post by cduda »

Trying to program the following frequency into a Motorola Radius Mobile and Motorola Maxtrac Mobile but will not accept and rounds it up to next closest. I searched through the avail freq. by using up and down arrows and see that they DO accept narrowband but not just the one I need.

Please help. Thanks

Freq is: 154.1225 and it rounds up to 154.125

HT series Portables and CDM mobiles and Kenwoods accpet with no problem, just not these older ones. Someone said it IS possible.

Thanks
Top
User avatar
MotoMax300
NOT ALLOWED TO BUY/SELL/TRADE
Posts: 314
Joined: Mon Sep 04, 2006 12:59 pm

Post by MotoMax300 »

Been looking into this, as far as I have seen, I can't do it properly. I mess with maxtracs mainly, no sucess. Although, I have seen more complicated happen to be possible, so I cant say its not possible.
Top
k2hz
Posts: 531
Joined: Tue Mar 01, 2005 7:27 am

Post by k2hz »

Like most older radios, the Maxtrac synthesizer can not do 7.5KHz steps.
Top
Post Reply

Return to “Radio Programming”