Strange problem with trinking Maxtracs (Type I)
Moderator: Queue Moderator
- wireless.friendly
- Banned
- Posts: 145
- Joined: Tue Dec 13, 2005 3:28 pm
Strange problem with trinking Maxtracs (Type I)
Hi all!
Please help me with my problem.
I have 2 trunked Maxtracs: D45MQA5GB5 and D35MQA5GB5.
I sucsessfully read and write both Maxtracs with trunked RSS - RVN-4043-S (ver. R05.07.03).
I sucsessfully read and write D35MQA5GB5 Maxtrac with LAB RSS (F17.81.12 aka G28.90.06). But when I try read or adjust D45MQA5GB5 Maxtrac with specified LAB RSS, I get message: Error Number 21 Has Occured: Radio Not Supported.
But why? Radios very similar - both trunked, Type I.
Please help!
Please help me with my problem.
I have 2 trunked Maxtracs: D45MQA5GB5 and D35MQA5GB5.
I sucsessfully read and write both Maxtracs with trunked RSS - RVN-4043-S (ver. R05.07.03).
I sucsessfully read and write D35MQA5GB5 Maxtrac with LAB RSS (F17.81.12 aka G28.90.06). But when I try read or adjust D45MQA5GB5 Maxtrac with specified LAB RSS, I get message: Error Number 21 Has Occured: Radio Not Supported.
But why? Radios very similar - both trunked, Type I.
Please help!
Your LAB RSS is older than your regular RSS, and it doesn't have the higher powered 800MHz model number in it's .mdf (Model Definition File) database. Therefore, it won't recognize it. Not much you can do about it, short of finding a newer version.
Todd
Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
- wireless.friendly
- Banned
- Posts: 145
- Joined: Tue Dec 13, 2005 3:28 pm
- wireless.friendly
- Banned
- Posts: 145
- Joined: Tue Dec 13, 2005 3:28 pm
And other question.
How I can determine exact trunk protocol of D45MQA5GB5?
My other Maxtrac (D35MQA5GB5) have sticker which shows that this is "Type I / Privacy Plus" radio.
But sticker on the D45MQA5GB5 shows only "Type I" and nothing more. But which trunk protocol? Privacy Plus? Or...?
How I can check and sure in this?
I try find out any info about supported protocols in RSS reports (print menu), but doesn't see anything.
Or "Type I" guaranties that this is "Privacy Plus" radio?
How I can determine exact trunk protocol of D45MQA5GB5?
My other Maxtrac (D35MQA5GB5) have sticker which shows that this is "Type I / Privacy Plus" radio.
But sticker on the D45MQA5GB5 shows only "Type I" and nothing more. But which trunk protocol? Privacy Plus? Or...?
How I can check and sure in this?
I try find out any info about supported protocols in RSS reports (print menu), but doesn't see anything.
Or "Type I" guaranties that this is "Privacy Plus" radio?
- MotoMax300
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 314
- Joined: Mon Sep 04, 2006 12:59 pm
- wireless.friendly
- Banned
- Posts: 145
- Joined: Tue Dec 13, 2005 3:28 pm
Correct, Type I radios are ALL Privacy Plus. You would have to get a "C" series Maxtrac to get Type II/SmartNet.wireless.friendly wrote:MotoMax300
Why you sure? No other variants for TT I Maxtracs?
I have no idea about LAB versions, or where you'd get them.
Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
- wireless.friendly
- Banned
- Posts: 145
- Joined: Tue Dec 13, 2005 3:28 pm
wavetar
But where must be "C" letter? For e.g. C45xxxxxxx or C35xxxxxxx?
And very stranger that LAB RSS doesn't support hi-power verstion.
Truked Maxtrac require special trunking version of LAB RSS or LAB RSS is one for all Maxtrac family?
Thanks!Correct, Type I radios are ALL Privacy Plus. You would have to get a "C" series Maxtrac to get Type II/SmartNet.
But where must be "C" letter? For e.g. C45xxxxxxx or C35xxxxxxx?
It is pitty.I have no idea about LAB versions, or where you'd get them.
And very stranger that LAB RSS doesn't support hi-power verstion.
Truked Maxtrac require special trunking version of LAB RSS or LAB RSS is one for all Maxtrac family?
- wireless.friendly
- Banned
- Posts: 145
- Joined: Tue Dec 13, 2005 3:28 pm
Todd! U r not right! All my RSS and LAB RSS have MDF file with my model munber - I check it - complete coincidence!wavetar wrote:Your LAB RSS is older than your regular RSS, and it doesn't have the higher powered 800MHz model number in it's .mdf (Model Definition File) database. Therefore, it won't recognize it. Not much you can do about it, short of finding a newer version.
Todd
I think that reason in that D45 Maxtrac have more new firmware or/and codeplug. Therefore only one software can read/write it - RSS RVN4043S ver. R05.07.03. This RSS doesn't have overlays (.ovl files in folder). As I know, newest Moto DOS RSS doesn't have overlays. Only older RSS has it.
But all my LAB RSS with overlays
Anybody know, Maxtrac LAB RSS exist in verision w/o overlays?