Anyone had the chance to remove a headlight on one of these yet? Going to mount strobes but can't figure out how to remove the headlight assembly.
Any ideas?
2007 Yukon XL, Yukon, Suburban
Moderator: Queue Moderator
I just did a 2007 Yukon. Two 10mm bolts on top where you can see them, and one hidden in the wheel well. also 10mm. You need to remove the 2 7mm bolts and a few push type retainers in the wheel well to see the one bolt.
I drilled the strobe in right below the oem marker bulb. Drill a 1 1/4" hole in the outer shell, then the 1" hole in the inner shell. I used the push in type strobe bulb, and sealed it with marine grade silicone. Came out very nice!
I drilled the strobe in right below the oem marker bulb. Drill a 1 1/4" hole in the outer shell, then the 1" hole in the inner shell. I used the push in type strobe bulb, and sealed it with marine grade silicone. Came out very nice!
Jay Goldmark, EMT
Ex-Captain, Woodmere Vol. Fire Dept.
Fire District Communications Supv.
KC2ZHI Amateur Radio Operator
Licensed Master Electrician
Owner, Top Class Electric, LLC.
Woodmere, Long Island, NY
"Enjoy Life, it's not a dress rehearsal !!!"
************************************************************
Ex-Captain, Woodmere Vol. Fire Dept.
Fire District Communications Supv.
KC2ZHI Amateur Radio Operator
Licensed Master Electrician
Owner, Top Class Electric, LLC.
Woodmere, Long Island, NY
"Enjoy Life, it's not a dress rehearsal !!!"
************************************************************