Hi Group: I have a question about Minitor III pagers. I recently picked one up and purchased all required hardware
to program it. I am using a windows 98 machine running the program under true DOS. I am recieving (model number error)
It shows the correct model number and serial number is showing a question number for one of the digits and it does not show
any other programming information in the pager.
I have tired v 3.05 and 3.14 and am getting the same error.
Can anyone shed any light to what the problem may be?
Thanks in advance,
Bill
Minitor III Help.
Moderator: Queue Moderator
- radios4bill
- Posts: 131
- Joined: Mon Mar 25, 2002 4:00 pm
- What radios do you own?: XTL5000, APX7000, Astro Saber
- RESCUE161
- Batboard $upporter
- Posts: 2062
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: Too many!
Re: Minitor III Help.
I'd try programming it with Windows PPS. I had the same problem with my Minitor III's. Nothing showed in DOS software, but Windows software showed everything just fine.
I'm using version 2.1.0 for Minitor III & IV that I got off of MOL a while back.
I'm using version 2.1.0 for Minitor III & IV that I got off of MOL a while back.
Scott
KE4FHH
Religion: Kills folks dead!
KE4FHH
Religion: Kills folks dead!