Astro saber-3 DTMF keypad
Moderator: Queue Moderator
-
- Posts: 210
- Joined: Mon Sep 22, 2003 9:59 am
Astro saber-3 DTMF keypad
I have an astro saber-3 VHF that has a couple of the DTMF keypad number missing (9 and the pund key). I am wanting to replace it. Can anyone give the part number for this keypad and what it might entail to replace it? I am assuming it is removing the radio portion from the case and just replacing the rubber keypad part. All repsonses appreciated...Thanks
Brian Griffin: Ah, if my memory serves me, this is the physics department.
Chris Griffin: That would explain all the gravity.
.
Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.
Chris Griffin: That would explain all the gravity.
.
Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.
Re: Astro saber-3 DTMF keypad
Unfortunately the keypad is an integral part of the case. It does not have its own separate part number, and is held in place by the front cover which I believe is sonically welded to the main housing. In short, your only option would be to replace the whole housing.
-
- Posts: 210
- Joined: Mon Sep 22, 2003 9:59 am
Re: Astro saber-3 DTMF keypad
I was afriad of that. I think I will just seal of those two spots and let it ride. Radio works great otherwise. Thanks
Brian Griffin: Ah, if my memory serves me, this is the physics department.
Chris Griffin: That would explain all the gravity.
.
Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.
Chris Griffin: That would explain all the gravity.
.
Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.