Hey all,
I bought an MCS2K off the fleabay. The prior owner was nice enough to hack off the female portionof the 6 pin molex for the rear head's amplified speaker. I have 3 wires exposed on either side of the "wound": Orange, Green, and Blue. The Orange/Green wires are roughly 14ga, and the Blue one is 24ga or so.
I have searched through the 'WTF is this wire' threads and cant find a wiring plan for the cable that includes the Orange and Blu wires. I am sure they are for the audio to the rear amplified speaker and volume controls thereon, but a little more specific info would be lovely.
Thanks in advance!
MCS2000 dual control head cable question
Moderator: Queue Moderator
- Hey Nurse
- was hovburglar
- Posts: 147
- Joined: Sat Jun 25, 2005 12:42 pm
- What radios do you own?: The ones with smoke inside
MCS2000 dual control head cable question
You want me to do WHAT with your radio?
Re: MCS2000 dual control head cable question
your correct. I dont have the cable in front of me but can check this weekend. The rear head uses an amplified speaker with a volume control as the volume on the head is not used. I am thinking 1 should be power, ground and audio. Did you look at any with a VOM ?
KB2ZTX