Qucik Call Decode question
Moderator: Queue Moderator
- BigTex1136
- Posts: 509
- Joined: Sat Nov 08, 2003 4:45 am
- What radios do you own?: XTS APX VIKING KENWOOD
Qucik Call Decode question
Is there a way to get a XTL5000 or CDM1250 to decode multiple quick call tones on one channel much like the Minitor Pagers? I know I can make different channels with different QC tone but not a channel with multiple tones. Thanks Guys
GOT MODAT?
- SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: Qucik Call Decode question
In the CDM1250 & 1550, there is a dropdown in the Signalling --> Quik-Call II System --> Basic Tab that give you a bunch of different call formats to choose from. About the best you can do there is A-B/C-D, or A-B/A-D/C-D for multiple tone sets. There are some other combinations, too. It's probably not as much as you might need but it is something.BigTex1136 wrote:Is there a way to get a XTL5000 or CDM1250 to decode multiple quick call tones on one channel much like the Minitor Pagers? I know I can make different channels with different QC tone but not a channel with multiple tones. Thanks Guys
Can't speak to the XTL's.
-
- Posts: 34
- Joined: Mon Sep 29, 2014 2:08 am
- What radios do you own?: HT1250 EX600XLS CDM1250 CP200
Re: Qucik Call Decode question
You would do that through adding a signaling system, keep in mind you need to have the proper tone frequency and as far as I know you can only use 1 system per personality, you also have to keep in mind that you can only have 4 decoding systems per radio, if you want you can create a different personality for each QC-II system