Newbie Programming Issue

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
NYBKHAM256
New User
Posts: 1
Joined: Wed Apr 13, 2016 1:52 pm

Newbie Programming Issue

Post by NYBKHAM256 »

Hi Everyone,

This is my first post here on the batlabs and I'm hoping I can get some assistance or at least pointed in the right direction. I have an XPR 7550 (Firmware version R02.30.13) with CPS 12.1.

I'm trying to program the radio to work on the DMR-MARC network. I followed the instructions at http://www.dmr-marc.net/FAQ/subscriber-program.html but I'm not getting through on the system. I can hit the repeater and I have an RSSI of 87 but I don't hear anybody talking on the system and nobody answers me.

There is a live feed of the network at http://47.21.226.42:42420/MinimalNetwatch so I can see that I'm keying up and that there are others on the system.

Any ideas?

Thanks!
Top
N4KVE
Posts: 1648
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: APX XTS XTL TRBO 900MHZ

Re: Newbie Programming Issue

Post by N4KVE »

Do you have the proper group set up in the contact list? Also you should upgrade the FW to match the CPS you are using. GARY
Top
Post Reply

Return to “Radio Programming”