Does,
Anyone have a schematic for the programming cable for the Model 4010 console?
Thanks
Lee
Zetron model 4010 programming cable
Moderator: Queue Moderator
Re: Zetron model 4010 programming cable
I have about 5 of those at the shop. Will have to wait till next week. Send me a PM if you can't find the info and I'll get it for you. I do know it uses 6-conductor flat telco cable.
Re: Zetron model 4010 programming cable
Here you go:
DB9 Female to RJ12 (6-pin, modular plug)
1-
2-----Red--------4
3-----Green------3
4-
5-----Blue-------1
6-
7-
8-
9-
Pin-out for the RJ12. Pin 1 is on the top when the pins are to the right, and the tab is on the back.
DB9 Female to RJ12 (6-pin, modular plug)
1-
2-----Red--------4
3-----Green------3
4-
5-----Blue-------1
6-
7-
8-
9-
Pin-out for the RJ12. Pin 1 is on the top when the pins are to the right, and the tab is on the back.