I have 2 Xts3000 Radios
1 x Series R
1 x Series S
The Series R had Secure Option in CPS
The Issue is if I disable to Secure Option then I get no PTT Beep, If I enable it I get the tone but the 9/10 Error When Turning On.
I don't need Secure so how do I defeat the 9/10 Error and still get a TX Beep when I TX ?..
Maybe I need a dummy Secure Key or something..
Rob..
xts3000 No Tx Tone
Moderator: Queue Moderator
Re: xts3000 No Tx Tone
do not believe you can.
The beep is to warn you that the TX is in the clear.
The beep is to warn you that the TX is in the clear.
Re: xts3000 No Tx Tone
do not believe you can.
The beep is to warn you that the TX is in the clear.
The beep is to warn you that the TX is in the clear.
Re: xts3000 No Tx Tone
Yep, you will need an encryption module installed to get rid of the 09/10 error message, and a key loaded into it.
Is it really worth all that just to have a beep when you key up!?
Is it really worth all that just to have a beep when you key up!?
Re: xts3000 No Tx Tone
Nope..
Was just looking for some conformity between the 2 radio's
Rob..
Was just looking for some conformity between the 2 radio's
Rob..