Hi all,
I have a unique situation going on with a VHF XTS 3000 radio that was purchased from Ebay. The radio is as stated a VHF XTS 3000 flash code 501004-000000-3 it is in excellent condition and was a former "Union Pacific Railroad" radio. The radio was originally programmed with conventional and trunking personalities which I deleted and basically cleared it back to a standard radio. I have programmed 10 of my local sheriffs department freq's which is on a new narrow band and simalcast system into the radio.
So here is the issue, channel one to 10 were programmed with proper TX/RX freq's and PL's and the radio programmed properly. Channel one is the only one that transmits and receives on the proper freq when I switch to channel 2 -10 they TX and RX on channel one freq not what is programmed into the personality. I closed the program and re-read the code plug and all the channels have the proper TX/RX and PL info but the radio still only RX and TX with the channel 1 personality on 2-10.
Any ideas???
VHF XTS 3000 programming question
Moderator: Queue Moderator
-
- Posts: 433
- Joined: Sun Sep 09, 2001 4:00 pm
VHF XTS 3000 programming question
***********************************
I hate arguing with stupid people. They just bring you down to their level and beat you with experience.
I hate arguing with stupid people. They just bring you down to their level and beat you with experience.
-
- Posts: 433
- Joined: Sun Sep 09, 2001 4:00 pm
Re: VHF XTS 3000 programming question
NEVER MIND NY DUMB ASS FIGURED IT OUT LOL
***********************************
I hate arguing with stupid people. They just bring you down to their level and beat you with experience.
I hate arguing with stupid people. They just bring you down to their level and beat you with experience.