GM950 filtered output.
Posted: Thu Jun 08, 2017 10:05 pm
Hello.. I have made a repeater with two Motorola GM950 and one of the cheap repeatercables from Ebay. It works just fine, except that i cant get the filtered audio output out on pin 11 in the acc connector. It sound very tinny with the discriminator output going to pin 2.
So far i have solved it by a speaker transformator going from pin 1 to 16 and the secundary to pin 2 and ground, and the sound is excellent, but of cause highly affected by the speaker volume. This is an issue as the repeater is used as a basestation simultaneusly..
Is there any way to get the filtered audio to pin 11 or any other acc pin, or do i have to make a mod to the radio?
RSS and all works fine and i can program the pins as i like .
So far i have solved it by a speaker transformator going from pin 1 to 16 and the secundary to pin 2 and ground, and the sound is excellent, but of cause highly affected by the speaker volume. This is an issue as the repeater is used as a basestation simultaneusly..
Is there any way to get the filtered audio to pin 11 or any other acc pin, or do i have to make a mod to the radio?
RSS and all works fine and i can program the pins as i like .