Page 1 of 1
Battery Backup for the MSR2000
Posted: Mon Aug 11, 2003 6:59 pm
by afussell
I need to know what the voltage should be for a battery backup system for the MSR2000 repeater, can anyone help me on this, I do not have a manual for it. And does anyone know where to get these batteries??
Thanks!!
Posted: Mon Aug 11, 2003 8:38 pm
by Alan
Is it a 30 watt unit or a 100 watt unit?
Alan
Posted: Tue Aug 12, 2003 1:13 am
by Will
13 volts for most of them, DuraComm maks a isolator switch that works well with the standard MSR. without the backup battery supply.
Posted: Tue Aug 12, 2003 4:20 am
by afussell
It is a 100 watt unit.
Posted: Tue Aug 12, 2003 3:09 pm
by Will
The radio runs off 13.8 volts.
Some stations have the battery revert power supply and have the retecangular red & black jacks on the pannel with the coax conns.
The battery revert has a relay in it to transfer the 13 volts to the radio from the battery. Look for a part number on the power supply and a relay in the ps.
Both stations use the feroresonate transformer in the power supply and add two extra boards and the relay for battery revert.