Can You Program My VHF Systems Saber???

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
eddierowe
Posts: 4
Joined: Wed Aug 11, 2004 8:17 am

Can You Program My VHF Systems Saber???

Post by eddierowe »

Okay, I've done all that I can to program my Systems Saber, and I'm just about to throw it out the window. I think my software is bad, and I'm tired of trying to figure out this whole mess. The model number is: H43TUK5170CN. All I need is the first 16 channels programmed with the basics like scan and stuff. Please email me and let me know what you'll take for a price. Thank you for all of your help...Eddie
eddierowe1@yahoo.com
User avatar
FFParamedic571
Banned
Posts: 467
Joined: Tue Aug 27, 2002 7:57 pm

Post by FFParamedic571 »

aew you sure its for Systems saber? Regular saber wont work with Systems
akardam
Posts: 2251
Joined: Thu Mar 04, 2004 10:53 am

Post by akardam »

Check your E-Mail...
eddierowe
Posts: 4
Joined: Wed Aug 11, 2004 8:17 am

Post by eddierowe »

Yes, I know the Saber software will not work with the Systems Saber. I looked at that first. I think the software may be bad. We'll wait and see.
Microwave Mike
Posts: 259
Joined: Fri Sep 14, 2001 4:00 pm

Post by Microwave Mike »

The System Saber can be spoted by the metal covered display, or lack of a display, on the front cover. It will have a cable going from the mother board to this display/ front cover. If it does not have this, then you have a Saber, not a System saber.

mm
eddierowe
Posts: 4
Joined: Wed Aug 11, 2004 8:17 am

Post by eddierowe »

Howdy Gents: Just wanted to let everyone know that I've located a programmer for my radio (Not RKG.) Thanks for all of your help and advice.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”