I have a lot of time put into programming our ht1250's (dozens and dozens of MDC Call list entries).
I know you cannot program the ht1550 using the ht1250 file, but how can I cut and paste or easily program the ht1550 without having to re-enter all that data into a new file?
Any help would be appreciated.
Thanks
Program a HT1550 with CPS using HT1250 file?
Moderator: Queue Moderator
-
- Posts: 24
- Joined: Sat Feb 25, 2006 2:48 pm
You can't...sorry. I've been in your boat...one customer with 5 different HT/CDM codeplug templates for all their different models. Very complicated programming too.
Todd
Todd
Last edited by wavetar on Thu Mar 09, 2006 4:59 pm, edited 1 time in total.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
- HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
open both codeplugs and drag & drop from one to the other. but it might not transfer all the info, the 1550 sometimes has more boxes to fill so you will still have to go thru them even after you move them.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Have you ever programmed these models? Drag & drop is NOT a feature of the HT/CDM CPS...only for the Astro/25 & MTS/MCS CPS.HLA wrote:open both codeplugs and drag & drop from one to the other. but it might not transfer all the info, the 1550 sometimes has more boxes to fill so you will still have to go thru them even after you move them.
Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
- HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
you're right, i was reading ht and thinking mts
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
- HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
it should as long as the model number matches. the worst that will happen if it can't is it will tell you why i couldn't do it. you won't hurt the radio.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS