Any way to use an A5 Control Head?

SpectraBob · Post by **SpectraBob** » Tue Jun 06, 2006 7:18 pm

I have a Spectra 45-watt VHF trunk-mount radio, which originally came with a 9000-series control head. Is there any way I can convert it to use a standard A5 control head? Is the type of control head determined strictly by permanent radio drawer-unit programming, or are there any jumpers or board changes that can be made?

Thanks!

Bob

fail999 · Post by **fail999** » Wed Jun 07, 2006 5:38 am

Try reading the information in the Spectra specific section of the main Batlabs site. It's all there

fail999

SpectraBob · Post by **SpectraBob** » Wed Jun 07, 2006 3:53 pm

Can you please share a little more detail, as to where exactly on the website I might find that information?

Thanks!

Bob

kcbooboo · Post by **kcbooboo** » Wed Jun 07, 2006 3:58 pm

Start here:

http://www.batlabs.com/spectra.html

Bob M.

SpectraBob · Post by **SpectraBob** » Wed Jun 07, 2006 5:45 pm

Thanks! I'll dig deeper into this file...

Bob

kcbooboo · Post by **kcbooboo** » Thu Jun 08, 2006 3:05 am

Then go here - should keep you busy reading for days!

http://www.open.org/~blenderm/spectra/index.html

Bob M.

Any way to use an A5 Control Head?

Any way to use an A5 Control Head?

Re: Converting from 9000-series head to an A5 head

Re: A5 Control Head change