mcs 2000 model2

dario_denmark · Post by **dario_denmark** » Sun Jul 09, 2006 12:44 pm

Hej alle.
jeg har en mcs 200 der er helt ny.

nå jeg prøver at læse den med rss version 05.04.10 dos

skriver den.
!!!Warning!!!
You can not read, program, or tune a
CBI radio until you initialize it

-----------------------ENGLISH--------------------------

helo all. i but a mcs 2000 model 2 an its brand new an i cant read it.
i use rss v. 05.04.10 dos soft.
it makes thes messegs.

!!!Warning!!!
You can not read, program, or tune a
CBI radio until you initialize it

an sory me english is not so godt.

spectragod · Post by **spectragod** » Sun Jul 09, 2006 6:46 pm

You need to give it a serial #.

SG

dario_denmark · Post by **dario_denmark** » Mon Jul 10, 2006 2:03 am

give it a serial in the rss?

how do i do that?

Best regards

Post by **wavetar** » Mon Jul 10, 2006 3:54 am

It appears you have a "blank" radio. You need to go into the service alignment screen and follow the "blank board initialization" procedure.

Todd

dario_denmark · Post by **dario_denmark** » Mon Jul 10, 2006 4:51 am

wavetar wrote:It appears you have a "blank" radio. You need to go into the service alignment screen and follow the "blank board initialization" procedure.

Todd

i says that the codeplug is to new for thes aps.

worng rss version?

Post by **wavetar** » Mon Jul 10, 2006 7:27 am

It looks like your RSS version is too old. You need to try a newer version. The latest version for MCS2000 is 5.08.00.

Todd