2 CDM-1250's and RICK Repeater Ignition Sense

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
User avatar
roepkcs
New User
Posts: 3
Joined: Fri Oct 02, 2009 2:59 pm
What radios do you own?: XTL1500/2500 XTS1500 CDM1250

2 CDM-1250's and RICK Repeater Ignition Sense

Post by roepkcs »

Have 2 1250's attached to a RICK repeater. On their own, Pin 10 of the accessory of the 1250 would go to the ignition. With the RICK attached to both radios, Can I use Acc J4 on the RICK and Pin 10 on the RICK to control both 1250's to power Up/Down on Igintion ? I have tried this and the radios power up on ignition, however do not power down when ignition is shutdown....
Any Education on this would be appreciated

Craig
Craig in Wisconsin
Post Reply

Return to “Vehicle Radio Installs”