Hello -
I have a Motorola Cube Charger (NTN9176A) that the power cable was lost on. I am looking to make a new cable, and need the pin out for the plug.
Anyone help?
NTN9176 Wiring Schematic
Moderator: Queue Moderator
-
- New User
- Posts: 1
- Joined: Mon Jul 12, 2010 6:39 am
Re: NTN9176 Wiring Schematic
See this thread below
http://batboard.batlabs.com/viewtopic.php?f=8&t=46184
and
Pin 1 Red +12V to the Battery
Pin 2 White PAC-RT
Pin 3 not used
Pin 4 Yellow +12V Ignition Sense
Pin 5 not used
Pin 6 Black Vehicle Ground
EDIT: forgot to add that the Pin 1 +12V main power should have a 2A fuse inline
and the ignition sense is supposed to be a 1/4 amp fuse.
http://batboard.batlabs.com/viewtopic.php?f=8&t=46184
and
Pin 1 Red +12V to the Battery
Pin 2 White PAC-RT
Pin 3 not used
Pin 4 Yellow +12V Ignition Sense
Pin 5 not used
Pin 6 Black Vehicle Ground
EDIT: forgot to add that the Pin 1 +12V main power should have a 2A fuse inline
and the ignition sense is supposed to be a 1/4 amp fuse.
fineshot1
NJ USA
NJ USA