Can someone lead me through how to do priority scan. Basically this is to trouble shoot an issue. I attempted to add a second frequency and scan it but to priority back to f1. There is no traffic while in priority scan mode. If i hold down the push to listen button the yellow led blinks. when i let go it stops. does that mean something? I am attempting to resolve the issue on my own through trial and error.
Monitoring F1 works on its own. I am not able to solely monitor F2 to test it as I cannot miss alerts on F1. Any and all help is appreciated. Not sure if it helps:
F1 - my town fire frequency 470.925 (has always worked flawlessly)
F2 - my town police frequency 477.350 (i added this into the pager)
Firmware is 3.0.0.
Codeplug is version 0.036
Under model options, priority scan f1 is on and i cannot edit it from that tab. Next to it is a changeable box that says .512 seconds.
Fixed Alert - off
Priority Alert - off (should this be on???)
I have learned to navigate through the software through a mix of trial and error and reading where ever i can pick up on it. I have also not changed options without knowing their effects. So i have not tested changing fixed/priority alerts, or timing intervals. I have gone through all 8 pages of this subforum reading various Min 3/4/5 texts to learn as much as i can.
This is a "factory unit". The only modification that i made is changed it from 1 frequency to 2 frequencies. It should not be damaged.
Thanks for your help.
MinV Priority Scan
Moderator: Queue Moderator
-
- New User
- Posts: 19
- Joined: Sun Sep 05, 2010 3:27 pm
- What radios do you own?: Min4, Min5, CDM1250, HT1250
Re: Minitor V Priority Scan
What options are selected for the Mode Switch position that you are using when you are scanning both channels?
Also what UHF sub-band is your Minitor V? (What information is on the small label on the back of the pager)
Bob
Also what UHF sub-band is your Minitor V? (What information is on the small label on the back of the pager)
Bob
-
- New User
- Posts: 19
- Joined: Sun Sep 05, 2010 3:27 pm
- What radios do you own?: Min4, Min5, CDM1250, HT1250
Re: MinV Priority Scan
Model A04KMS9239BC
Band Split H: 470 - 477.9875 MHz
SW-A
Priority Scan F1
Alert Type: Tone
Thats it. All the other switches work the way i want them
B: Monitor F1 Tone
C: Selective Call F1 Vibrate PTL
D: Monitor F1 Tone & Vibrate
So I want to monitor f2 (PD) but revert to f1 (primary fire) for all channel traffic, especially tones...
Does that help? I had sent my code plug to someone who offered their help but they never got back to me...I can send it to who ever is interested in taking a look.
Thanks
Band Split H: 470 - 477.9875 MHz
SW-A
Priority Scan F1
Alert Type: Tone
Thats it. All the other switches work the way i want them
B: Monitor F1 Tone
C: Selective Call F1 Vibrate PTL
D: Monitor F1 Tone & Vibrate
So I want to monitor f2 (PD) but revert to f1 (primary fire) for all channel traffic, especially tones...
Does that help? I had sent my code plug to someone who offered their help but they never got back to me...I can send it to who ever is interested in taking a look.
Thanks