Batboard

tcash158

Thank you

tcash158

Can anyone tell me what version of software it takes to program a Motorola xpr7350?

tcash158

I have never had any issues programing minitor 5 pagers until I upgraded to windows 10. Now I get the device not working or what ever its called in device manager where my usb to serial adapter is. Any ideas on how to fix this, its always worked before.

tcash158

I have gotten a brand new charger and brand new battery and when you put the pager in the charger the red light flashes, you can put the battery in the charger by itself and the same thing happens. When you turn the pager on and put it in the charger the light stays red, its just not acting the way ...

tcash158

Thank you

tcash158

I have a minitor 5 charger problem, I have changed batteries, and chargers, when I place the pager or a battery in the charger the light will flash red then turn green, I know they dont charge that quik. As said I have tried different batteries and chargers, what is causing this?

tcash158

Is there anyway to cut and paste or copy fields so I don't forget something in the programming or anything to make it easier?

tcash158

I need to ask if there is a way to copy a code plug from a cdm1250 45watt to a cdm1250 25watt? It says cannot clone model number mismatch, I know the models are different due to wattage but I want to use the same programming. Is this possible or can someone telle how to do this without writing the c...

tcash158

I have 4 impress chargers that are not working, they have power coming to them but the charging led will not come on. Is there a way to fix these, are there any common problems with them or is it just best to replace the charger base. Would there be any software issues that could be looked at on the...

tcash158

I have a dead HT1250 an HT750 that will not turn on with any battery I put on them, the Motorola shop and another radio shop have told me that the main chip in both radios are bad and they have to be sent to Motorola and its a 300.00 flat repair each. I also have a EX600 that the keypad quit working...

tcash158

I still have this problem but the chargers dont flash orange they are staying orange and sometimes if you take the radio out and put it back in they will charge, and this happens even if the radios are cool to the touch. Thanks for any help.

tcash158

I got a pyle 120 watt peak 70 volt amp and ran my cdm1250 speaker level line into the amp and it is running 5 8 inch speakers with a 70 volt transformer on each speaker and 2 horns in the pay. If we turn the pa input to about 1/4 way up and the amp output to max or anywhere else all of the speakers ...

tcash158

OK but on what frequency would our radios have to be on Im not familar with this at all sorry.

tcash158

We dont have a station alerting system its an all volunteer dept and we just want to be able to adjust the volume and listen to the radio audio from the radio room radio in an upstairs office and the radio is mounted downstairs.

tcash158

Is their anything that you can do to be able to open a bay door with a radio vhf high band? We have a couple of remotes but you can only put so many remotes on a reciever for the bay door and we need to be able for more people to be able to open the door. I have seen devices that will turn on a ligh...

tcash158

We are buildong a new fire station and want to run some other speakers in some fo the offices upstairs from the radio room. We want some white flat speakers to mount in a wall with volume controls and we are not using a 70 volt pa system just speakers with their own volume control. Any help is great...

tcash158

We have several portables the have a white paint pin number on the front of them and I need to know how to remove the white paint from the front of the radio? Any help is greatly appreciated, I have to clean these numbers off and so far I have not found anything to get into the roungh plastic and ge...

tcash158

Is there a way to take a HT1250 and talk into a CDM1250 in a fire truck and then the fire truck repeat the traffic to dispatch. We have coverage issues out in our County and we want to talk into our mobiles with our portables and possibbly have the mobiles act as a repeater. All are VHF and I just w...

tcash158

Same here no stickers or markings I have no idea what kind it is and it has 4 screws per top piece total of 12.

tcash158

I have one of the knock off led lightbars that is the same style as the code 3 2100 series except mine has screws that hold the top down. I need leses for this bar can anyone help me find a dealer for these?

tcash158

Would like to but Im not the technical, can you give me alitte insight on that please. I have a friend that Im sure can check it if he knows what to look for.

tcash158

I have a dead HT1250 no matter what battery I use on it, and it has not been dropped or got into any moisture at all. The Motorola shop said the main chip is bad and I wanted a second opinion. I saw a post in here once about eprom fixes and I thought maybe that might be it. I have hooked it up to th...

tcash158

Can you tell me how to set a pager or radio to alert for the weather service on the 1050hrz tone please?

tcash158

We have radios with impress batteries on them and impress chargers on all of our fire trucks hooked up to the shore line. Every now and them the chargers are flashing orange and it doesnt seem like the radios charge with the chargers are doing that becasue I took one out of the charger that was flas...

tcash158

Is there a way to still have the features of the mdc signaling or number indentifiers on the cdm and ht seris radios and silence it in the programming?

tcash158

Has anyone done this and converted a vhf pager to a uhf? I ahve been told by radio tech's that you can change the band split with this program from vhf to uhf but the board in the pager will have to be changed for it to work. Someone please let me know if this is correct please.

tcash158

Why do you have to change the rf board in the pager, cant you just change the band split?

tcash158

I have the same question how do you set up the ex600 or the CDM1250 for this as well? Or can someone lead me in the direction to do it.

tcash158

I have an old dell latitude with windows 98 and i have used it to program my maratrac before. I recently updated the computer and ever since I have when I try to read my radio I get a error that says run time error dived by zero or something like that. Well I went into my setup and changed my speed ...

tcash158

So can I change the transmiting ID code in the radio that transmits that cade to show a unit number on all the recieving radios when its keyed up? Like if it transmits an id of 1234 now and I take all of the reciving alias's out of all of the radios then change what ever the transmit id is to the pe...

tcash158

We currently have 6 cdm 1250's, 6 ex 600's and about 13 ht 1250's all Motorola of course that have MDC 1200 signaling. The question I have is there a way to change the I-D of one radio and then all of the rest of the radios show that change without reprogramming all of the radios. At this time if I ...

tcash158

I have recently reprogrammed our 6 cdm 1250's and since then they wont recieve during scan on any channel except the priority ch. You can turn to the channel individually and it works fine, all of the PL tones are correct and were never changed during programming anyway. What could be the problem an...

tcash158

What kind of cost is there for 3 sites and will any of the portables or mobiles in the County have to changed? They are on a repeater now so can you just use the same frequecies input and output and the same PL and put up the 3 sights and the voters?

tcash158

We have a large County and have had trouble covering it for years we recently went to a repeater from a different tower location and there are still 2 areas of our County 1 north and 1 south that have trouble with their pagers going off and talking back to dispatch. This is all on a vhf hight 154 ra...

tcash158

We have several radios on our Dept that have number id's in them already that are mdc 1200. What I need to know is how do I take one that had a number id in it already and change its id and make it so all the other radios will see the new unit number insted of the old one when they key up. Can you j...

tcash158

I am having the same problem, I think you have to get a laptop with windows 95-98 loaded on it and you will be OK.

tcash158

Is there anyway to get rss that needs windows 95 or 98 to work on windows xp, without loading it on another computer?

Search found 37 matches

Re: Motorola xpr7350?

Motorola xpr7350?

minitor 5 programing with windows 10

minitor 5 charger and battery question

Re: minitor 5 charger problem

minitor 5 charger problem

Re: Cdm1250 programming

Cdm1250 programming

impress charger problem

Dead Ht1250, HT750, & EX600

Re: Impress charger problem

70 volt pa amp problem for fire station

Re: Using a radio to open bay door at fire dept

Re: Speakers for CDM 1250 in Fire Station

Using a radio to open bay door at fire dept

Speakers for CDM 1250 in Fire Station

Removing paint from radio

Mobile Repeater

Re: LED lightbar

LED lightbar

Re: Dead HT1250

Dead HT1250

Re: Quick Call paging on CDM 1550

Impress charger problem

Re: How Do You Silence That Annoying MDC Squawk?

Re: Minitor V Engineering mode

Re: Replacing Minitor V RF Boards ...

Re: CDM1250/Ht1250 QCII Encoding

maratrac programming

Re: MDC identifiers

MDC identifiers

cdm 1250 wont recieve during scan

Re: Needing help for County radio coverage

Needing help for County radio coverage

number identifier

Re: M1225 with XP

using windows 95 or 98 rss on windows xp