Search found 426 matches
- Sat Sep 20, 2014 9:44 am
- Forum: Radio Programming
- Topic: Qucik Call Decode question
- Replies: 2
- Views: 2825
Re: Qucik Call Decode question
Is there a way to get a XTL5000 or CDM1250 to decode multiple quick call tones on one channel much like the Minitor Pagers? I know I can make different channels with different QC tone but not a channel with multiple tones. Thanks Guys In the CDM1250 & 1550, there is a dropdown in the Signalling...
- Sun Sep 07, 2014 4:51 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI "enhanced" announcement?
- Replies: 4
- Views: 7735
Re: Minitor VI "enhanced" announcement?
Thanks very much. No problem. I try to pay it forward when ever I can. The other users here on the batboard have been kind, generous, and very patient with me as I struggled to catch up on dealing with the radios in my interest area. For Tom and everyone else, here is a link to that Minitor VI prog...
- Sat Sep 06, 2014 4:49 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI "enhanced" announcement?
- Replies: 4
- Views: 7735
Re: Minitor VI "enhanced" announcement?
The PPS announcement selections allow standard, customized and enhanced. I understand the first two, but what does 'enhanced' do? One of the large dealers posted a 6 page "how to" on programming the VI. Here's the description of all three options: • Standard: Announces the mode, frequency...
- Tue Sep 02, 2014 3:45 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor II tone reed
- Replies: 5
- Views: 8170
Re: Minitor II tone reed
Steve- I do indeed have a Fleabay watch list for Minitor II's, but some of that stuff is priced right up in Crazy Land. I thought I'd test the waters here and maybe try to do a trade or something, since hams usually don't shaft each other with wanton abandon. I did not think that $5 to $10 per reed...
- Mon Sep 01, 2014 7:15 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor II tone reed
- Replies: 5
- Views: 8170
Re: Minitor II tone reed
Howdy gang. I'm a volunteer FF ( and dept. radio geek) and I have a department issued Minitor V pager. I also personally own a couple of Minitor II's that came from a neighboring department. Here's my pickle: the battery life of my Minitor V is, shall we say, rather sudden. Rather than spend money ...
- Sun Aug 31, 2014 12:24 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Cancellation Notice: CP200 PR400 CM200 CM400 PM400
- Replies: 21
- Views: 7226
Cancellation Notice: CP200 PR400 CM200 CM400 PM400
If you haven't seen it already, here is a link to the cancellation notice from /\/\ for this series of radios:
https://drive.google.com/file/d/0B3k529 ... sp=sharing
https://drive.google.com/file/d/0B3k529 ... sp=sharing
- Mon Aug 25, 2014 3:35 pm
- Forum: Radio Programming
- Topic: CP200 Password Hacking...
- Replies: 24
- Views: 10840
Re: CP200 Password Hacking...
I lied. The pressure was killing me so I installed the xvi32 and had a few issues until I Ran as an Administrator then hex code changed first time and I'm able to read the radios. Am I correct in assuming that from now own as long as I'm using this CPS, any time I read a password protected radio an...
- Sun Aug 24, 2014 6:52 pm
- Forum: Radio Programming
- Topic: CP200 Password Hacking...
- Replies: 24
- Views: 10840
Re: CP200 Password Hacking...
Thanks Steve, I think I'll try xvi32. Right now when I go to Windows START in the find files and folders I type in cps.exe and then right click on it and I'm given the option to Hex Edit with Hex Workshop. After I install xvi32 I'll have to get you to tell me how to read the cps.exe file because it...
- Sun Aug 24, 2014 6:24 pm
- Forum: Radio Programming
- Topic: CP200 Password Hacking...
- Replies: 24
- Views: 10840
Re: CP200 Password Hacking...
I open cps.exe and scan with Hex Workshop. I searched and found the stream with the 75 09 that I changed to 90 90, closed Hex WS and it ask me if i wanted to save changes and I clicked yes. But it still ask for password and enter will not bypass and when I go through the same procedure the 75 09 is...
- Sun Aug 24, 2014 10:56 am
- Forum: Radio Programming
- Topic: CP200 Password Hacking...
- Replies: 24
- Views: 10840
Re: CP200 Password Hacking...
I feel your pain. I've probably spent a weeks worth of reading over the year or so just trying to teach myself. Here the update...I saved a backup copy of cps.exe to my desktop. Opened the regular cps.exe and my default hex editor is Hex Workshop, so I read it with it. I found the string you mentio...
- Sun Aug 24, 2014 10:38 am
- Forum: Radio Programming
- Topic: CP200 Password Hacking...
- Replies: 24
- Views: 10840
Re: CP200 Password Hacking...
No matter which hex editor you use, David, it should find the string that Steve listed above at address 0012B041 hex for R05.16. I mention this because it's only a double check showing that you've done everything correctly up to the search-and-find point. Let me add that I spent many hours of inter...
- Sun Aug 24, 2014 10:18 am
- Forum: Radio Programming
- Topic: What CPS for a Motorola GP680 ?
- Replies: 6
- Views: 4344
Re: What CPS for a Motorola GP680 ?
nope no dice tired EMEA cps I did a google search on gp680 cps and from what I found, it looks like there is an MPT specific version of the Waris European CPS that will program that radio. I found a number of threads in both US and UK forums that discussed this in detail. Probably worth an in depth...
- Sat Aug 23, 2014 10:15 am
- Forum: Radio Programming
- Topic: CP200 Password Hacking...
- Replies: 24
- Views: 10840
Re: CP200 Password Hacking...
This is probably like beating a dead horse, but with all the searches I seem to find no new information, just the same info that's been floating out in cyberspace for a while. I'm not a computer genuis but I do alright, and I've purchased 3 used CP200XLS radios in good condition that are all mates....
- Wed Aug 20, 2014 4:04 am
- Forum: Vehicle Warning Equipment Discussion
- Topic: 2014 Jeep Grand Cherokee siren speaker install
- Replies: 1
- Views: 7245
Re: 2014 Jeep Grand Cherokee siren speaker install
Does anyone have any recommendations on both a compact speaker and where to mount said speaker on a 2014 Grand Cherokee? Space is limited under the hood and I was curious if anyone out there has any experience. Thanks. To do it right on the WK2's, you have to remove the front grille and fascia. Thi...
- Mon Jul 28, 2014 5:24 am
- Forum: Vehicle Radio Installs
- Topic: Gain vs. Stubby Ants
- Replies: 4
- Views: 8193
Re: Gain vs. Stubby Ants
We're going to put a VHF (Astro Spectra) and UHF (CDM) in a new Ford Utility Police Interceptor. I lean towards gain whip ants with a spring base. But before I totally rule out stubby ants, I'm looking for your thoughts. Thanks. Most urban and suburban police, fire, and EMS agencies do just fine wi...
- Thu Jul 24, 2014 11:52 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Mobile Based Repeater
- Replies: 3
- Views: 1520
Re: Mobile Based Repeater
Hello everyone. I've been out of the radio end of things for awhile and I'm not quite up to speed with what's out there at the moment. I'm looking to build a repeater utilizing two mobile radios for extremely occasional use (hence not wanting to stick the $$ into a full-on repeater) in a mobile com...
- Thu Jul 24, 2014 5:23 am
- Forum: Radio Programming
- Topic: CP200 Not Being Read
- Replies: 7
- Views: 4341
Re: CP200 Not Being Read
I purchased a pair of UHF 4 channel CP200's last week. There were originally purchased together since their serial numbers are just one off. Their firmware version is R03.06.02. When received only 2 channels were programmed to talk to each other so I read one of the radios, added 2 more PERS and fr...
- Mon Jul 21, 2014 9:32 am
- Forum: Radio Programming
- Topic: Commercial Series cps R05.16 codeplug password off
- Replies: 4
- Views: 3781
Re: Commercial Series cps R05.16 codeplug password off
Hi Has anyone figured out a way to modify the commercial series cps ( i have R05.16 )to work with password off ? for the codeplug on a cp040 and if so can any one give me the offset to edit Thanks :lol: Just search here with the keywords commercial cps password - there are several threads that cont...
- Thu Jul 17, 2014 5:45 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: M1225 wont take programming
- Replies: 5
- Views: 2059
Re: M1225 wont take programming
20 channels and 20 named. Its weird because I can actually write back to it the computer shows changes have been made, but they haven't. I can then read the radio and it shows changed information but once again nothing has changed. I have never seen this before. I am using 1225 version 4.0 for XP. ...
- Thu Jul 17, 2014 3:40 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: M1225 wont take programming
- Replies: 5
- Views: 2059
Re: M1225 wont take programming
I have several M1225 UHF radios that will read and write with M1225 4.0, but they are not really getting written to. The computer shows codeplug write successful, but no actual changes take place. I have never seen this before. Any ideas?? The radio TX and RX are good. Model: M44DGC90J2AA How many ...
- Fri Jul 11, 2014 4:10 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: HT1250 - adding Channels/Personalities to Zones
- Replies: 6
- Views: 2815
Re: HT1250 - adding Channels/Personalities to Zones
Maybe my HT1250 was force feed an LS codeplug using Waris Lab CPS? Maybe the number of conventional channels in an LS codeplug depends on how much space is used up by the trunking setup - so if you don't use trunking, you get more than 32 conventional channels? I also had to use LA (Latin American)...
- Fri Jul 11, 2014 8:01 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: HT1250 OR HT1250LS ??
- Replies: 5
- Views: 2124
Re: HT1250 OR HT1250LS ??
I have a "HT1250" with no tags or labels. I have read the radio. The model number is H25KDH9AA6 The serial number is 749TJLT28* Firmware is R05.13.09 Do I have a HT1250 or a trunking HT1250LS? The CPS seems to have LS trunking options available BUT I have been able to create 3 Zones of 48...
- Thu Jul 10, 2014 9:17 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: HT1250 vs HT1250LS boot up tones
- Replies: 2
- Views: 974
Re: HT1250 vs HT1250LS boot up tones
I have two HT1250's with no tags. At switch on, one radio gives a 2 bleep "dit dit" while the other gives a 3 bleep "dit dar doh" Does this indicate that one radio is a HT1250LS with different firmware to the HT1250...or do later standard HT1250's use different boot up bleeps to...
- Wed Jun 25, 2014 11:48 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Cooling For GM300
- Replies: 8
- Views: 2247
Re: Cooling For GM300
I'm looking for an option for cooling my Radius mobile radios which sometimes have higher than specced duty cycles. At the moment I have a 90mm computer fan behind one and a 120mm fan behind the other. The issue I have is that these fans run 24/7 and I'd like to change this to 1-2 40mm fans hot glu...
- Thu Jun 05, 2014 3:18 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor V Engineering mode
- Replies: 71
- Views: 71193
Re: Minitor V Engineering mode
After entering the password, click on View --> Engineering ModeKeith5888 wrote:Ok I got the engineer logon to be on the menu. Now when I put the password in nothing comes up can someone help please.
- Sat May 31, 2014 7:38 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Repeater Bi Directional VHF
- Replies: 13
- Views: 3207
Re: Repeater Bi Directional VHF
On Ebay, seller mre1032 offers a bi-directional RICK that will do exactly what you need with radios like the CDM's. If you want to link a couple of MOTOTRBO radios, he also has two different RICKs for that. http://www.ebay.com/itm/RA-2-Repeater-Adaptor-Motorola-GM300-GR300-CDM1250-RICK-/120473770318...
- Fri May 23, 2014 2:00 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM1550LS+ Transmit Problem
- Replies: 8
- Views: 2571
Re: CDM1550LS+ Transmit Problem
The official term is "short between the headphones."Will wrote:"the loose nut behind the microphone" for radio operators.... ...mmckenna wrote: Ah yes, like the "loose nut behind wheel" issue that I see happen with cars.
- Thu May 15, 2014 6:46 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI Firmware Upgrade - D0014
- Replies: 7
- Views: 9430
Re: Minitor VI Firmware Upgrade - D0014
The release notes on this are now in the same file area of MOL as the upgrade. They don't say much:
I. Enhancements
Adjusted squelch levels
II. Corrections
Support of non standard A tone durations when User Tone System is selected on the Channel Tabs
III. Known Issues
None
I. Enhancements
Adjusted squelch levels
II. Corrections
Support of non standard A tone durations when User Tone System is selected on the Channel Tabs
III. Known Issues
None
- Mon May 05, 2014 6:20 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor VI (6) released
- Replies: 52
- Views: 37512
Re: Minitor VI (6) released
http://lmgtfy.com/?q=minitor+6+user+manualadamdavis43040 wrote:anyone know where to find a user manual for the VI, I didn't get one with mine.
Or
Can anyone tell me how to remove or erase stored pages?
Hint: UCC Wireless is the link to click on.
- Fri May 02, 2014 5:05 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Motorola Part Number
- Replies: 2
- Views: 813
Re: Motorola Part Number
Hello All! I need the following part numbers for the following service manuals: Ht-750 Ht-1250 Radius P-1125 Portable Radius M-1225 Mobile PM me with numbers Thanks David HT750 & 1250 Basic Service Manual = 68P80906Z54 HT750 & 1250 Detailed Service Manual = 6881088C46 M1225 Mobile = 6880904...
- Thu Apr 17, 2014 3:41 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: My EX600XLS first impressions
- Replies: 10
- Views: 2780
Re: My EX600XLS first impressions
For the sound issues, this thread from a year ago contained some valuable tips on setting up the Waris HT's for better sounding audio: http://batboard.batlabs.com/viewtopic.php?f=15&t=104868 I would think that the EX600XLS should benefit from the same settings.
- Thu Apr 17, 2014 3:31 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CM200 question
- Replies: 1
- Views: 1024
Re: CM200 question
I have 2 CM200 in a low power RICK setup. The transmit radio only turns on now when connected to the RICK and the receive radio is powered on. Is there a fuse somewhere on the board internally that could be the issue or does having the radio set in the CPS to RICK Tx change it to where it does not ...
- Sun Apr 13, 2014 10:27 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM-1550 Tune up procedure ?
- Replies: 3
- Views: 1446
Re: CDM-1550 Tune up procedure ?
Looking for a tune up procedure for my CDM 1550. Did not see it in the service manual. I'm trying to find out if I can adjust the xmit steering voltage and the CPS isn't that user friendly for me to understand. Thanks Which manual? Basic or Detailed? CPS has nothing to do with what you are asking a...
- Thu Apr 10, 2014 7:51 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Narrow Band ?
- Replies: 1
- Views: 794
Re: Narrow Band ?
What is the FCC license and what Part is it licensed under?arlojanis wrote:Does a pump control and data transmitter on 217 mHz with emission of 20K0F1D need to be narrow banded. If so, what would be the new emission?
- Mon Apr 07, 2014 7:29 pm
- Forum: Radio Programming
- Topic: CDM1550 Power Control
- Replies: 6
- Views: 2343
Re: CDM1550 Power Control
I have a UHF 40 watt CDM-1550 in the ham band that I am using as a low power link between repeater sites. 40 watts is wayyyy to much power for this LOS link and I would like to get the power out down to 10 watts or less is this possible?? Thanks, Rory Bowers, K6CKS I don't think you can push them d...
- Mon Apr 07, 2014 8:01 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CM series keeps rebooting
- Replies: 7
- Views: 2038
Re: CM series keeps rebooting
Hi all. The issue is with a CM series unit. I programmed the radio with a scan list for two channels and checked auto scan. After I programmed the unit the radio is very slow to react to button presses and will just reboot itself after about ever 10 seconds. When trying to read the radio I just get...
- Mon Apr 07, 2014 4:53 am
- Forum: Radio Programming
- Topic: PROGRAMMING GM300
- Replies: 3
- Views: 1643
Re: PROGRAMMING GM300
I tried to program a GM300 using a ribless cable from the computers serial port, after programming, the radio's speaker no long works. Are ribless cables reliable for programming (if so, is there a particular brand that's better?) or should you always use a rib for programming them? Is there an opt...
- Mon Apr 07, 2014 4:46 am
- Forum: Radio Programming
- Topic: Incompatible Model Error programming HT750
- Replies: 4
- Views: 1846
Re: Incompatible Model Error programming HT750
I have programmed a number of HT750s successfully using a RIBless cable using CPS 4 & 6.04. I came across one that brings up an error "Incompatible Model", and will not connect to the radio, even to read. I have successfully programmed a similar "R" frequency range model. I ...
- Fri Apr 04, 2014 4:20 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Receiving Issue
- Replies: 19
- Views: 4025
Re: Receiving Issue
Another question, if I were to replace the sm50 with a CM300, is the pinout on the 16 pin connector the same ? The pin outs for the SM50 are to be found on batlabs.com --> Model Specific Info --> SM50. The pin outs for the CM200/300 radios are in the manual at: http://www.callmc.com/customer_servic...
- Wed Apr 02, 2014 12:00 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Motorola CP200XLS
- Replies: 2
- Views: 912
Re: Motorola CP200XLS
Hello All! I need the following information: I am looking at buying one of these. Part number for the programming software Part number for the programming cable Please post here Thanks David Software is RVN4191 - $265. I've had great luck with USB aftermarket cables, but if you have a RIB and insis...
- Tue Apr 01, 2014 5:01 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Minitor QC-2 Question
- Replies: 1
- Views: 831
Re: Minitor QC-2 Question
So I have a bunch of Minitor IV's and V's to program and I have a few questions that I'm sure somebody on here knows the answers to: 1. I know the standard tone timing of 1 second (A tone) / 3 Second (B tone)…can tone B be shortened up? For those in the LA area, I know Ventura County has really sho...
- Mon Mar 31, 2014 7:57 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM Repeater with 2 CDM 1550
- Replies: 3
- Views: 1528
Re: CDM Repeater with 2 CDM 1550
Hi guys and girls....I was just wondering what I would need to make a repeater out of 2 CDM 1550's. 2 uhf or 2 vhf or 1 of each and etc. Thanks If you are not even sure what frequencies or frequency range you'll be using, buying radios is putting the cart way out in front of the horse. We've talked...
- Mon Mar 31, 2014 4:46 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Simplex Repeater Info ?
- Replies: 8
- Views: 2122
Re: Simplex Repeater Info ?
Anyone have any experience with Simplex Repeaters ? Basically looking for a unit that will store a brief message and then rebroadcast it from a higher elevation when radio is de-keyed. Looking to build something self contained maybe in a large diam. PVC tube for a camping group. Do you want this un...
- Fri Mar 28, 2014 2:26 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Receiving Issue
- Replies: 19
- Views: 4025
Re: Receiving Issue
100% agree. I have one here and NB is not a programmable option.RFguy wrote:I doubt the SM50 was narrow-banded. it's not a programmable option. It requires a dozen or so component changes.
Best to replace the SM50's with something NB.
- Wed Mar 26, 2014 6:51 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Minitor 5/6 Programming question
- Replies: 4
- Views: 1765
Re: Minitor 5/6 Programming question
On the V, Delayed N instead of Revert N. Stick with about 10 seconds.ces911 wrote:Thanks. The other question I have is that after it receives alert it doesn't re mute it self and stays open to other traffic until i push reset button..
Not sure on the VI as I am not working with them yet.
- Wed Mar 26, 2014 3:33 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Minitor 5/6 Programming question
- Replies: 4
- Views: 1765
Re: Minitor 5/6 Programming question
How can I fix this issue, Our tones are A-B and A-C, We have a Duty tone and a All call tone. When toning the all call they tone (A-B and then A-C) When they tone the all call the pager records the all call tone and then a separate recording for the all call tone.. is there any way to fix this in p...
- Thu Mar 20, 2014 5:23 am
- Forum: Vehicle Radio Installs
- Topic: 2012 Ford F250 Install
- Replies: 12
- Views: 13583
Re: 2012 Ford F250 Install
Well I bought a new truck a month ago and got my console installed last night. I am still waiting on another bracket for another cdm750 to be installed as a tac radio and also I have some cup holders coming for it as well. Since I had the seats out to install the brackets I ran the wiring under the...
- Mon Feb 24, 2014 1:26 pm
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor 6 "UL Listed"
- Replies: 7
- Views: 9050
Re: Minitor 6 "UL Listed"
Speaking of the Minitor 6.. It looks like it was not produced in a Low band version.. A previous thread here, and one on RR have both discussed and confirmed that fact. There are several dealers participating in those discussions. There is no low band version listed on /\/\'s MSRP sheet either: htt...
- Sun Feb 23, 2014 8:34 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: HMN1038B wire pinout
- Replies: 2
- Views: 2435
Re: HMN1038B wire pinout
Does anyone have the pinout for the Motorola HMN1038B desktop microphone. I want to reconfigure it for my Kenwood TS-2000. The schematic is right on repeater-builder's Maxtrac/GM300 page along with full documentation extracted from a Motorola manual. http://www.repeater-builder.com/motorola/maxtrac...
- Fri Feb 21, 2014 7:49 am
- Forum: Motorola Digital and Voice Paging
- Topic: Minitor 2 Fixed Alert
- Replies: 2
- Views: 6572
Re: Minitor 2 Fixed Alert
It is fairly easy. There are 2 small solder pads on the circuit board that need to be jumpered to enable fixed alert. They are labeled as such. If you can't find them I will look for my service manual and upload a picture. Also, fixed alert only works on the pager itself. It has no affect when the ...