Did anyone turn up a Marauder manual?
I'm also looking for a couple of Raider Extreme units and the manual.

I've been a "new user" for 7 years but I 've been around for a lot longer... my first Moto was an 80D in a '57 Buick, and my first base radio was a railroad base version of a 140D. Back in the 1970s I built up a 12 frequency Motrac, and full duplexed a UHF Motrac... and repeaters. Then I g...

I have been tasked with the maintenance of an existing LTR system that has two dozen low power UHF R1225s in service. Each one is followed by a 5w in - 100w out amplifier. I'm running out of good spare R1225s. Manual: Does anybody have a extra copy of the paper manual for the HVN9054 RSS/CPS ? I bel...

There's an article on repeater-builder on how to find the password in your CDM. no mods to the CPS (ProRadio.exe) required.

http://www.repeater-builder.com/motorol ... index.html

Mike

Some times you don't need the radios... Years ago when I had a large number of Motrac / Motran / Mocom-70 / Micor elements I took advantage of the fact that they all used the same pin diameter and all were 9.6 volt powered units. The radio manual provided the pinout, or you can look up channel eleme...

Looking for any info on a Moto cable - part #30-80384F65. It connects an MTR2000 to a external controller, at least a Trident LTR maybe others. I have five MTRs here, each with this cable, I'd like to reuse the cable to connect the MTR to another type of controller as the MTR end has a really hard-t...

The above link "http://www.gdsatcom.com/cte_autotest.php"is dead. I'm also looking for info on controlling a 2670... and for a way of measuring BER of a transmitter. The way I read the manual the only available BER test that a 2670 provides is a closed loop test, and I need to BER test the...

There is an error in the PDF.

Add a wire from pin 7 on the receive radio to pin 7 on the transmit radio.