Batboard

Terriers618

Still looking for part numbers for encryption for XTL consolette 5 algo board need AES and ADP

Terriers618

While on the topic, I am looking for part numbers for an XTL accessory port programming cable and an XTL O series connector KVL cable.

Terriers618

I am looking for all the part numbers to add AES encryption to my XTL5000 consolette. The consolette serves as an interface to my centracom gold elite. I need the encryption board carrier, the encryption board (preferred 5 algo) and the key loading port part for the front of the consolette. Thanks f...

Terriers618

My apologies…. O2.

So far I have noticed the soft keys below the screen don't show when connected to an XTL chassis. Would be nice if it did work! I would save the APX chassis for a better environment and throw an older XTL chassis on the application where the O2 head will be used.

Terriers618

Looking to get an 02 head working with an XTL. Anyone else have this configured and working?

Terriers618

EXCELLENT! Been looking for this for a while. Want it for use on APX4000

Terriers618

Awesome! Thank you!

Terriers618

Anyone?

Terriers618

Looking for the part number of the metal cover which secures the crypto carrier and crypto board within a XTL chassis.

Thanks!

Terriers618

I believe I am getting the 4000 at around 2000 with a mediocre flashcode. Maybe 2100? Interested in the light. Would love to see something even more compact

Terriers618

What is the apx4000

Terriers618

Digital as in P25 Rx. I think it's safe to say a majority of departments in need of alpha paging have text solutions in place

Terriers618

So the minitor 6 is real. Digital???????

Terriers618

Does the multikey flashcode option not affect ADP? Last I checked if you don't have multikey you only get one key regardless of encryption type you want to use. Maybe I am mistaken with the 5000

Terriers618

Any indication as to cancellation dates for the 1500 and 2500 series?

Terriers618

Any suggestions?

Terriers618

The XTL1500 can't communicate with any other control head. It simply doesn't have the software capabilities

Terriers618

Tony, I believe I ran into the same problem with an older XTS2500 (might of been a 1500). There was a secondary setting somewhere that I had to manipulate. I also had issues with my key not loading properly at first which caused me to be unable to change those settings. I will fire up the laptop and...

Terriers618

So it appears the APX line is not capable of decoding quick call tones. The option appears in the CPS however it says future feature or something of the like. The APX4000 is a great compact P25 radio. Our volunteer EMS division issues portable radios to every member. While the idea is to quickly tra...

Terriers618

double check that your unmute settings are set properly as well. If unmute is set to AND rather than OR for a parameter such as ID decoding or other value that could be your problem

Terriers618

So bottom line is there is absolutely no standalone BT earpiece that will work with the APX embedded BT without some sort of wire and PTT pod? I would be better off getting some sort of adapter to run through the accy port.

Terriers618

A flashkey upgrade wont change the model number of the radio.....

Terriers618

This is a Motorola BT headset that was ordered right off MOL from the APX accessory section? Maybe I have the model wrong? Any ideas on model numbers for headsets that will work with APX?

Terriers618

Trying to pair a M300 (or whatever) to an APX4000 with internal bluetooth.... I apologize if I am missing something here but searches on this board has yielded nothing. BT menu is turned on, BT on the unit is turned on. I see NO options to go into pairing mode. Putting the headset in pairing mode by...

Terriers618

you would need lab software..... good luck finding it

Terriers618

Theory was proven with this setup and we purchased a P25 repeater. Thanks for all the help guys!

Terriers618

I know this has been discussed in a few other posts however I need some clarity. I am looking to purchase a used Quantar repeater. I constantly find conflicting info about what firmware version will support P25 operations (IMBE, who even uses VSLEP?). Some advertised quantars running sw 16.x.x adver...

Terriers618

4wire and the cge is configured as such

Terriers618

Back to this.... recently something went wrong with my setup. Somehow the tx audio from the console is coming back out of the speakers on the centracom gold elite. Taking the repeater setup out of the equation resolved so we know the problem doesn't lie with a crossed pair of copper somewhere. I als...

Terriers618

Will, The repeater is about 400 feet from the BIM. I have an ITA2000 connected to the accy port of a motorola rick. From there I have a 4wire connection back to the BIM and full duplex audio form the repeater setup on my centracom gold elite. The radios are two XTL1500's. Since that is all working g...

Terriers618

Yes the channel can operate full duplex. There is a duplexer in the mix already. The actual wire that hooks into the MT200 through the phone bundle only has one twisted pair. I will find another wire set with two twisted pair and put the MT200 in 4wire mode to accomplish full duplex at the console. ...

Terriers618

I temporarily took an MT200 off of a CDM and hooked it into the accy port on the RICK. Seems to work great after a few adjustments to the front switch config. We are working with XTL mobiles on the RICK so I don't need the ability to change channels or anything. My end goal would be to have full dup...

Terriers618

Ok great. I will look into picking up a tone remote adapter. If all I needed was rx and tx audio is there any other connection solutions? Just out of curiosity.

Terriers618

Yea thanks Bill. Maybe you'd be interested in donating the money for a quantar? I am trying to work with the equipment I have. Ideally I would like to hook the wireline somehow right into the RICK (HLN3333B) or the mobile radios themselves if its possible? All I need on the CGE console and through m...

Terriers618

I don't believe it does. It is a motorola RICK HLN3333B. Maybe I am missing something here? If there is a RIC with a wireline interface that you suggest let me know I will buy it tomorrow.

Terriers618

I have a wireline between my CGE system location and the location where I have a rick repeater setup. The distance is less than a quarter of a mile. Is it possible to interface with wireline into the rick so that I may manipulate TX/RX from the console in a full duplex way. Half duplex is fine if ne...

Terriers618

My mistake, in my excitement of finally getting two 1500s to work together to create a repeater I misread what equip you were using. Not for 200 but I would imagine the price tag on a used 1500 these days should be around 700-800 bucks? Better than a 20k astro repeater but yes there are cheaper rout...

Terriers618

I am a huge fan of the apple operating system. However I still wanted to have the functionality to run windows based programs such as Moto CPS. VMWare fusion is an excellent product to virtually running windows within Mac OS. The support and sharing of interfaces and resources is unparalleled to any...

Terriers618

I just need to get about 7-10mhz above range on a parts built xts4000 from fleabay. Iv been holding off on ordering one because the hacked parts are all UHF L. I'd rather not brick it but certainly wouldn't lose any sleep if I did. If anyone has had high success with this I'd greatly appreciate your...

Terriers618

Two XTL1500s and a rick..... much cheaper. I hardly notice any double vocoding audio issues when using newer P25 radios with more recent firmware. When I attempted to transmit with an old XTS3000 that hasn't seen a firmware update in almost a decade... well thats a different story. This setup worked...

Terriers618

Hello, This may have come up before however I wanted to share a pretty sweet setup I am using with fellow Apple fans. Now that most programming cables are USB and our inventory is all using newer CPS, I have migrated fully to programming from my MacBook Pro. I am running Mac OSX Lion as my top level...

Terriers618

Is it even possible to program out of band on the XTS 2500/5000 series anymore?

Terriers618

I have ricked together two XTL1500s to create a P25 repeater which works beautifully. It is a non life safety operations channel. I modified the RICK cables to interface with the XTL's. For obvious reasons the unit IDs won't pass through nor will any type of encryption. If we wish to run encryption ...

Terriers618

What is the next version of lab software that will handle IMBE on these radios? Is it still DOS based or is it windows based

Terriers618

By similar i mean that it has the same backlight problem - that is all

Terriers618

this is not an xts2500i - also not stolen - its electronic and tagged serial number ran clean through all possible areas.

It has a similar configuration to the marine setup however the flashcode is different

rather than dwell on assuming it is stolen - how can the problem be resolved???

Terriers618

Any solid answer on this? I think I got one of these radios as well. Its under warranty. I shipped to Depot and they shipped back with a working LED but a non working backlight. They also replaced the sticker on the front of the case from the supposed marines "Motorola" to the standard &qu...

Terriers618

Yes that page is under the utilities link off the main page - its what I was talking about updating. Didn't know that board and regular site were under diff ownership. If I can get in touch with someone I would be interested in hosting batlabs.com if the original gentlemen has no interest in continu...

Terriers618

Can we add those details the the serial number mfg page on batlabs.com? Who should this post be flagged to to have that done.

Terriers618

we have the same exact issue - more with ex600-xls than the ex600. It has ranged from a bad speaker to a bad PA to other board issues.

A lot of them - especially the ones manufactured in 2003 - are going bad.

Search found 144 matches