Batboard

crazyboy

OEM battery?

crazyboy

I'm not trying to test your intelligence, but have you tried putting it into programming mode with a known good fully charged battery? What you describe is symptomatic of a nearly fully discharged or defective battery. Ha, no offense taken. I believe that may actually be the problem. Charger has be...

crazyboy

I'm not trying to test your intelligence, but have you tried putting it into programming mode with a known good fully charged battery? What you describe is symptomatic of a nearly fully discharged or defective battery. Ha, no offense taken. I believe that may actually be the problem. Charger has be...

crazyboy

Good evening, I am attempting to change some settings in one of my Minitor 5's, but this particular one will not enter programming mode. Like usual I set it to C, Hold down the reset button and turn the pager on. It does a short version of the standard programming beep and if I let go of the reset b...

crazyboy

I would program up a CDM 750 to trigger it off the alert pin on the radio. Run the trigger output to an OMROM adjustable timer that is set to latch for 3 cycles. The fun part is the 0800 to 2000 hours thing. There are clocks available that can do that but they are a few hundred dollars. In addition...

crazyboy

Most remote start units that I have seen have a wire that is for an accessory start. The last one I looked into you grounded the wire and the vehicle started. With that said you could use any sort of radio signalling to trigger a relay to momentarily connect that wire to ground for approx 2 seconds....

crazyboy

For me, it is the difference between making the repeater and not making it.

crazyboy

HLA wrote:it's the mdc id that's sent out, that's how they know who sent the signal

I believe hes talking about the alarm noise that the dispatcher hears once the console receives the emergency signal.

crazyboy

I'll ping the support guys with my questions - but I think my main issue is with advertising. There isn't any here and the custom app indicates that it removes the advertising within the application (or add's your own)... If we can get by with the free one and have there be no advertising associate...

crazyboy

I'm running tapatalk for free on a forum I admin that is running the same version of phpbb. No problems, and it was cake to install.

crazyboy

Under what conditions are you wanting it to sound? If you are just wanting it to sound off the fire tones, then what crazyboy said will work now if you are wanting it to sound under a tornado warning or act as a civil defense siren, there is alot more to it Good point, I assumed fire calls. He hasn...

crazyboy

Minitor V, XTS3000R or 4000, Droid 2.

crazyboy

Nice work! I agree with the black bezel!

crazyboy

Sequence Relay & Timed Off Relay to control the siren. Energize the relays from the minitor.

crazyboy

I understand what each pin does, however the minitor page does not say which pin is 1. I want to confirm I have the correct pinout. If I was looking at the plug that I would be plugging into the charger would this be correct?

crazyboy

I was having trouble getting it to alert. I think that I however have figured out that it was an ID ten T error.

crazyboy

Is there anyway to have the HT1000 alert upon receiving the correct set of quick call tones? I can get it to be silent and then open squelch upon receipt of the correct towns, however I was looking for a way to have the radio sound some type of alert when the tone set is received, like a pager does....

crazyboy

Ill double check that setting, and if that doesn't do it I'll swap heads. Thanks

crazyboy

I have two a5 spectras in a mobile install. One a dash mount uhf and the other a remote mount vhf. The backlight on the dash mount one always comes on with the setting set at what it was when it turned off. The remote mount always comes on with the backlight set to just the display and I have to man...

crazyboy

Looks great. Those are all HAW leds?

crazyboy

Usually CAD mapping, but I've seen DeLorme as well.

crazyboy

what exactly are you trying to accomplish?

crazyboy

Nope, best bet is to buy a scanner.

crazyboy

Here, Not sure whether all the lines are going to confuse you, I went overboard

crazyboy

No, you have to set it up in cps.

crazyboy

I'm not sure about the icom but the other 2 radios only need switched power on their accessory wire. Place a fuse tap in the vehicles fuse panel on a circuit that goes on and off with the key, I prefer the audio circuit. You could probably get away with connecting the ignition sense wires straight t...

crazyboy

Do you mean cdm1250's? Is having dispatch send the evac tone out of the question?

crazyboy

So can I change the transmiting ID code in the radio that transmits that cade to show a unit number on all the recieving radios when its keyed up? Like if it transmits an id of 1234 now and I take all of the reciving alias's out of all of the radios then change what ever the transmit id is to the p...

crazyboy

So can I change the transmiting ID code in the radio that transmits that cade to show a unit number on all the recieving radios when its keyed up? Like if it transmits an id of 1234 now and I take all of the reciving alias's out of all of the radios then change what ever the transmit id is to the p...

crazyboy

thebigphish wrote:
crazyboy wrote:L brackets on the sides of the hood.

thomsoningreen wrote:Trunk Lip mount antenna base can be purchased from tessco for very little money

crazyboy

jts203 wrote:If using Hex Workshop you should look for hex string 4029861A which is 445 MHz and change all occurances to 00DE391A which is 440 MHz.

AWESOME, thank you very very much!!!!

crazyboy

If you have the latest version of the CPS, enter your frequencies like normal... It should take them if they are not too far out of range.. When you go to write the radio, you'll get an error saying one or more frequencies is out of range. Just write to it anyway and it should take the freqs.. -Mar...

crazyboy

Hello I have the latest version of the xts3000 cps. I'm trying to hexedit it so that it will accept frequencies a few mhz lower than the band limit. I have followed the instructions here, but am unable to find any of these values in the .exe please help!

crazyboy

No offense but with the little you asked you make it seem as though you have no idea what you need let alone how to make it work. IF that's the case I don't think you should be doing anything that's mission critical.

crazyboy

Astro
Astro 25

crazyboy

I have a spectra a5 that I'd like to be able to run two speakers and microphones off of the rear db15 connector. :o, I was thinking I could use the 4 pins for the mic and two pins for the speaker over cat5? and put an audio control inline with the speaker as well so that I could control the volume. ...

crazyboy

tvsjr wrote:Set it to vibrate/push-to-listen?

I agree, probably your best bet.

crazyboy

Is there a way to get the spectra to send a singleton lower than 6hundred something. I'm trying to get it to send a single tone in the high 3 hundreds, but it says that its too low.

Can I hex edit this or ?

crazyboy

Are all the radios experiencing the same problem or just yours? do you run pre ptt-id, if so do you have a side tone set and sure the users are waiting? Also if you have DOS muting setup is it set to mute too long? Repeater setup to strip the mdc and stripping too long? I'm not a brainiac tho, so yo...

crazyboy

L brackets on the sides of the hood.

crazyboy

Check the voltages and then trace all the wiring and make sure it's adequate. Ensure everything is properly fused while your in there, as it sounds like you may not have changed fuses. Check for any loose grounds.

crazyboy

Right, you do NOT handle the radio by the antenna.... The radio's antenna IS NOT a handle... And if you keep handling the radio by the antenna, I will dig out my "special" MX350S and make you carry it instead! The antenna is also NOT a clip for the speaker mic. I've found that spending th...

crazyboy

Changed out heads and now it programmed.

crazyboy

I guess its possible. I changed it to a dash mount just for S&G's and tried it but same problem. This time after doing the same thing though it said the radio was selectively inhibited

. I'm ready to start throwing stuff.

crazyboy

I have a mid power remtoe mount vhf a5 spectra that im trying to program. I'm using the rear db15 on the radio. I have the radio on, as soon as I hit read the radio starts rebooting itself. Screen goes from blank -> programming -> check rapidly and randomly. The software then quits trying to read it...

crazyboy

Thank you guys, greatly appreciate it.

crazyboy

Does anyone know of the bolt size and thread pattern to mount the mid power decks to the brackets? Also to mount the a5 control head to its bracket? Have some missing the bolts. Thanks

crazyboy

gws wrote:I had a procopper mount in a 92 1500 blazer.

http://home.columbus.rr.com/garlei/imag ... _radio.jpg

Thanks looks good. I think I'm going to end up just waiting and getting a gamber johnson long top plate, universal mounts, etc and make it work

crazyboy

Ok one more quick question (yea right :lol: ) I'm going to make a I guess sort of false floor in the back and mount the radios, strobe packs, fuse panels distribution etc back there. I'm planning on making it with 3/4" mdf covered with carpeting on the exterior and bolted down. Now I know for t...

crazyboy

Thanks, It looks like I will need to fab everything. Oh well More stuff to entertain myself with

And the radar, why didn't I think of that, such a great idea

Search found 221 matches