Trying to make a programming cable for a Millennium bar

Discussions regarding lighting, sirens, and other PS/Emergency response equipment can be had within this forum.

Discussions regarding legalities of lights, usages, and different state laws and regulations regarding warning equipment are not permitted.
See the announcement inside the forum for more details.

Moderator: Queue Moderator

Post Reply
User avatar
ke5ehi
New User
Posts: 4
Joined: Mon Sep 08, 2008 7:32 pm
What radios do you own?: Icom W32a, Motorola XTS, XTL

Trying to make a programming cable for a Millennium bar

Post by ke5ehi »

Just curious if anyone has pinned out the programming cable for the 911EP Millennium light bar. I have the software and am trying to maybe build a cable or buy one if I can find a cheap one. I don't have a template to go off of, so any help would be appreciated.
Glen W Christen
Posts: 203
Joined: Sun Sep 09, 2001 4:00 pm

Re: Trying to make a programming cable for a Millennium bar

Post by Glen W Christen »

Male RJ-45 Female 9-pin

1 goes to Pin 2
2 goes to Pin 3
3 Jumpered to 4
7 goes to Pin 5
Post Reply

Return to “Vehicle Warning Equipment Discussion”