Code 3 RLS versus Whelen Speaker !!! Need Help :D

Neutron_40 · Post by **Neutron_40** » Sat Jul 22, 2006 6:55 am

I need help !!!

I want to plug whelen Projector Series speaker on my code 3 RLS siren,

But on the install diagram for the Code 3 RLS unit he tell me to plug COM an SPKR on terminal 1 and 2 on the speaker but the whelen speaker have only WHITE (+) and BLACK (-) wires ???

Speaker Installation.:

COM - Connect to the wire from one 100 W ( 11 ohm ) speaker terminal 1.

SPKR - Speaker - Connect to the wire from 100 W ( 11 ohm ) speaker terminal 2.

NOTE: For all RLS sirens correct phasing is important and can be accomplished by connecting both speaker terminals marked " 1 " to the COM terminal and both speaker terminals marked " 2" to
the SPKR terminal.

Code 3 RLS install guide

WHITE = COM or SPKR

BLACK = COM or SPKR

Sorry everyone for the text i'm not really bilingual
(Live from Québec, Montréal)

Thank's

tvsjr · Post by **tvsjr** » Sat Jul 22, 2006 9:06 am

Speakers don't have a "polarity", per se. If you're only wiring up one speaker, the order doesn't matter - simply attach one wire to COM and one wire to SPKR.

Neutron_40 · Post by **Neutron_40** » Sat Jul 22, 2006 9:11 am

Ok Thank's