Hi!
In case this is not yet known, it is possible to enhance the frequency range of XTS5000 and similar radios programmed with the same CPS.
I just opened the patport.exe with an hex editor, searched in intel unsigned long for the frequency limits (in my case 136000000 and 174000000), replace them with the favourite value - and it was done.
My radios seem to work from around 130 up to around 180 MHz...
Probably the UHF versions offer some more, but I have none here to try it out :)
Extended frequency range with XTS5K
Moderator: Queue Moderator
- radio-link
- Posts: 245
- Joined: Sun Mar 16, 2003 8:49 am
Extended frequency range with XTS5K
regards - Ralph, dk5ras
--
Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
--
Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
The UHF will work the same way for the most part.. I have had a UHF-Low split all the way up to 479 Tx with no problems at all. The radio was very stable at that range.
-Marc
-Marc
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.