I have the opportunity to take some installation work coming up. I've never actually had to sit down and make some real estimates and bill for hours. The work I've done in the past has been very casual or a services for services trade (I'll do your lights, you landscape my mom's house for example). This has to be more realistic.
So what is the general going rate for installations? This will before lights/sirens only. No radios.
Thanks!
Installation $$ rates
Moderator: Queue Moderator
Installation $$ rates
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
-
- Posts: 210
- Joined: Sun Oct 13, 2002 10:39 am
Well, you have to factor in a bunch of things. Your liability insurance, cost of shop bay rental space, do you need to purchase special tools like glow rods or crimping frames?
Then, you have to decide how much of a pain in the ass the install would be, and how valuable the customer is going to be (is this the first of 300 potential installs, or is this bastard going to change what he wants four times, want to watch while you work, wants it yesterday, but wants you to put a handicap placard in it and give him a 75% discount)?
Then you have to factor in your own abilities. Do you have good working knowledge of the products you're going to install, and know how to make a clean, safe install, or do you think electrical tape and scotchloks are your best friend?
Finally, you have to call around to the other shops and see what they charge. Unless you are a miracle worker, or can do special installs, you prolly won't last long charging more than your local big radio shop / emergency equipment upfitter.
....... so I hear....
-Shawn
Then, you have to decide how much of a pain in the ass the install would be, and how valuable the customer is going to be (is this the first of 300 potential installs, or is this bastard going to change what he wants four times, want to watch while you work, wants it yesterday, but wants you to put a handicap placard in it and give him a 75% discount)?
Then you have to factor in your own abilities. Do you have good working knowledge of the products you're going to install, and know how to make a clean, safe install, or do you think electrical tape and scotchloks are your best friend?
Finally, you have to call around to the other shops and see what they charge. Unless you are a miracle worker, or can do special installs, you prolly won't last long charging more than your local big radio shop / emergency equipment upfitter.
....... so I hear....
-Shawn
Re: Installation $$ rates
$66.00 per hour here. Factors in insurance, etc.
Re: Installation $$ rates
It is all about what the market will bear. I have seen local MSS charge up to $140/hr, and that's portal-to-portal to boot. But that's also in Los Angeles, where the cost of doing business is probably significantly higher than your location.
- smokeybehr
- Posts: 114
- Joined: Wed Jun 20, 2007 4:07 pm
- What radios do you own?: Dozens. Want one? Email me.
Re: Installation $$ rates
When I was doing installs, I was charging a flat rate of $75 for a single radio or phone kit, and $50 for each additional radio installed, or removal for reinstallation. I never did lights/sirens, but I'd probably do the same rates for each set of lights (lightbar, strobes, or deck lamps) or siren. I didn't have my own shop, but I worked with another company doing mainly mobile installs, and when I had an extended install, I'd do it out of my garage at home.
No, I will not fix your computer. Call back during NORMAL business hours.