2003 ford CV install help

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
bulletproof-791
Posts: 1157
Joined: Fri Sep 12, 2003 2:07 pm
What radios do you own?: to may to list here!!!!

2003 ford CV install help

Post by bulletproof-791 »

ok lets start by saying thanks for looking... I have a 2003 FCV p-71 and I have a VHF spectra radio, ands a Whelen controller and I don't want to have to drill into the ashtray to mount the spectra bracket and then use 3m tape to mount the light bar controller …..any ideas and what to use? Any pic’s you can send will help
"Arguing with a fool proves there are two"
Top
User avatar
azlooker
Posts: 23
Joined: Tue Mar 04, 2008 6:45 pm
What radios do you own?: Way too many to list!

Re: 2003 ford CV install help

Post by azlooker »

Howdy, there are lot of mounting options available on ebay. There are some floor mounting plates that show up. do you have bucket seats? or bench seats? There is a mount available from Troy Products that would fit under the dash and mount to the floor. Also check out Havis-Shield and Gamber-Johnson for some more options. They all have on-line catalogs. Do you have a CVPI or just a CV? Hope this helps. Let me know if you have any more questions.

Adam
Top
User avatar
FireCpt809
Posts: 1848
Joined: Sat Jan 19, 2002 4:00 pm
What radios do you own?: Alot..

Re: 2003 ford CV install help

Post by FireCpt809 »

All depends on what you want. You can get a console if you have buckets. Or just a Gamber/johnson Short stack. Its just a sheet metal wedge and 2 " L" brackets you can mount on the hump.
Top
Post Reply

Return to “Vehicle Radio Installs”