MotoTrbo new firmware/new funktions
Moderator: Queue Moderator
MotoTrbo new firmware/new funktions
Hello all
in the post MotoTrbo repeater courtesy BEEP
http://batboard.batlabs.com/viewtopic.php?f=1&t=74489
RFguy wrote that there is a new firmware release for the mototrbo radios
are ther there any new infomation about this new releases ?
other than what RFguy have informed about?
any weblinks ?
so my question is... i have the mototrbo DP3601 (euro version of xpr6550) and would like to test the new Basic privacy feature but i know that i need to have my radios upgraded but do i also need to buy a new version of the mototrbo CPS ? the version i have i 1.0 build 58 i think ?
because i am just a private person an do not have access to MOL to get the new versions for (free)
and does any one know if this firmware release is for the europe market as well ?
Thanks Maelv
in the post MotoTrbo repeater courtesy BEEP
http://batboard.batlabs.com/viewtopic.php?f=1&t=74489
RFguy wrote that there is a new firmware release for the mototrbo radios
are ther there any new infomation about this new releases ?
other than what RFguy have informed about?
any weblinks ?
so my question is... i have the mototrbo DP3601 (euro version of xpr6550) and would like to test the new Basic privacy feature but i know that i need to have my radios upgraded but do i also need to buy a new version of the mototrbo CPS ? the version i have i 1.0 build 58 i think ?
because i am just a private person an do not have access to MOL to get the new versions for (free)
and does any one know if this firmware release is for the europe market as well ?
Thanks Maelv
CPS 3.5 - Firmware 1.03.01
MOTOTRBO CPS 3.5 BUILD (88) RELEASED ON APRIL 28, 2008
MOTOTRBO FIRMWARE VERSION 1.03.01 RELEASED MAY 6, 2008
Main Advantages
1. Allows DTMF Operation
2. Vista OS Support
(there are more, I just didn't care to list)
Tinker'r
MOTOTRBO FIRMWARE VERSION 1.03.01 RELEASED MAY 6, 2008
Main Advantages
1. Allows DTMF Operation
2. Vista OS Support
(there are more, I just didn't care to list)
Tinker'r
Mototrbo Firmware Release 01.03.02 & 01.03.03
MOTOTRBO MOL for System Enhancement
Release 1.03.02
What’s New in this release?
The following features are enabled with this MOTOTRBO Release:
• In-Call Channel Access rule modification
• Distinguishable Zone Toggle Indication
• Configurable Digital Automatic Gain Control (AGC)
• PL/Talk Group detect in Repeater (CCMPD01022832)
• Scan defeating TX Admit Criteria (CCMPD01022045)
• Pre Release 1.3 Clone Issue (CCMPD01039066)
• Flashzap driver (CCMPD01047969)
Woohoo, now I don't have to solder directly into the radio !
Tinker'r
Release 1.03.02
What’s New in this release?
The following features are enabled with this MOTOTRBO Release:
• In-Call Channel Access rule modification
• Distinguishable Zone Toggle Indication
• Configurable Digital Automatic Gain Control (AGC)
• PL/Talk Group detect in Repeater (CCMPD01022832)
• Scan defeating TX Admit Criteria (CCMPD01022045)
• Pre Release 1.3 Clone Issue (CCMPD01039066)
• Flashzap driver (CCMPD01047969)
Woohoo, now I don't have to solder directly into the radio !
Tinker'r
Re: MotoTrbo new firmware/new funktions
Version 3.6 CPS was released July 17th.
Mototrbo Firmware Release 01.03.02 & 01.03.03 + CPS 3.6
Yup, you need CPS 3.6 (Build 97) in order to take advantage of the new Firmware.
Tinker'r
Tinker'r
Re: Mototrbo Firmware Release 01.03.02 & 01.03.03
sorry for asking but when do you need to solder i the radios ?Tinker'r wrote:MOTOTRBO MOL for System Enhancement
Release 1.03.02
What’s New in this release?
The following features are enabled with this MOTOTRBO Release:
• In-Call Channel Access rule modification
• Distinguishable Zone Toggle Indication
• Configurable Digital Automatic Gain Control (AGC)
• PL/Talk Group detect in Repeater (CCMPD01022832)
• Scan defeating TX Admit Criteria (CCMPD01022045)
• Pre Release 1.3 Clone Issue (CCMPD01039066)
• Flashzap driver (CCMPD01047969)
Woohoo, now I don't have to solder directly into the radio !
Tinker'r
to achieve what ?? i like to know that ?
Maelv...
Mototrbo Firmware 01.03.02 Experimenting Notes
Well, the new flash 1.03.02 did not activate the "PL/Talkgroup Det" on the rear (XPR4550) accessory pin during Digital mode operation (as I was originally lead to believe). I ended up having to solder within after all. Now I have full linking functionality, and currently have it linked with another system.
Tinker'r
Tinker'r
-
- New User
- Posts: 8
- Joined: Sun Aug 03, 2008 10:02 pm
- What radios do you own?: XPR6550; CP200; CP 150;
Re: MotoTrbo new firmware/new funktions
I heard that there is another upgrad due to appear in Jan 2009.
I heard it will be something out of this world.
It will allow you to use all of your TRBO memory.
Can't wait for it.
I heard it will be something out of this world.
It will allow you to use all of your TRBO memory.
Can't wait for it.
Re: MotoTrbo new firmware/new funktions
Where did you hear this?
formula1976 wrote:I heard that there is another upgrad due to appear in Jan 2009.
I heard it will be something out of this world.
It will allow you to use all of your TRBO memory.
Can't wait for it.
Re: MotoTrbo new firmware/new funktions
The next version of CPS is supposed to allow you to input any number of channels you desire, limited only by the amount of memory in the radio. Somewhere around 1000 channels, give or take. Heard it at the road show in Toronto a couple months ago.samsharpe wrote:Where did you hear this?
formula1976 wrote:I heard that there is another upgrad due to appear in Jan 2009.
I heard it will be something out of this world.
It will allow you to use all of your TRBO memory.
Can't wait for it.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
-
- Posts: 151
- Joined: Mon Apr 14, 2003 5:09 pm
Re: MotoTrbo new firmware/new funktions
It is out now. Radio auto upgrades on reprogram. RDAC for the repeaters, RSSI comparitor functions via the now activated Ethernet port on the Repeaters, COR on the rear pins of the mobiles/repeater digital and analog (Tone remoteable on the digital side now!!), more advanced encryption, plug and play site linking, plug and play crossband via ethernet port....a few more gems. Oh and that 1K channel thing, although who could use that I will never know.
Suddenly You Were Gone
Re: MotoTrbo new firmware/new funktions
I do not beleive that upon reprogram that those features show up. I think that you need to do a flash upgrade and re tune the front of the sunscriber unit. I reporgrammed my portable with new software and the only thing that showed up was the memory indicator. However, when I opened up a test codeplug all features were there. Any further info???
-
- Posts: 151
- Joined: Mon Apr 14, 2003 5:09 pm
Re: MotoTrbo new firmware/new funktions
My bad, worded that wrong. Reprogram/flash. Flashing is very easy though.
Suddenly You Were Gone
- coreylk
- New User
- Posts: 5
- Joined: Sun Aug 10, 2008 6:55 am
- What radios do you own?: DR3000, DP3600, DP3400, XTNi
Re: MotoTrbo new firmware/new funktions
Q: What are the new CPS/firmware/codeplug versions? My supplier have me 01.03.04 for the repeater - don't see any changes?afterimage84 wrote:My bad, worded that wrong. Reprogram/flash. Flashing is very easy though.
-
- Posts: 151
- Joined: Mon Apr 14, 2003 5:09 pm
Re: MotoTrbo new firmware/new funktions
4.0.0.9 CPS
Firmware version R01.04.00 for portables and mobiles and R01.04.01 for repeater.
Firmware version R01.04.00 for portables and mobiles and R01.04.01 for repeater.
Suddenly You Were Gone
Re: MotoTrbo new firmware/new funktions
Uh, its not free, we pay for a subscription to ALL software on MOL, like everyone else, except that dealers frequently must purchase more than one subscription to cover more than one location or computer.maelv wrote:Hello all
in the post MotoTrbo repeater courtesy BEEP
http://batboard.batlabs.com/viewtopic.php?f=1&t=74489
RFguy wrote that there is a new firmware release for the mototrbo radios ...-...
and would like to test the new Basic privacy feature but i know that i need to have my radios upgraded but do i also need to buy a new version of the mototrbo CPS ? the version i have i 1.0 build 58 i think ?
because i am just a private person an do not have access to MOL to get the new versions for (free)