Spectra mount questions

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
crazyboy
Posts: 373
Joined: Fri Aug 27, 2004 10:29 am

Spectra mount questions

Post by crazyboy »

Does anyone know of the bolt size and thread pattern to mount the mid power decks to the brackets? Also to mount the a5 control head to its bracket? Have some missing the bolts. Thanks
kc7gr
Posts: 1031
Joined: Wed Mar 13, 2002 4:00 pm
What radios do you own?: Motorola, Icom, Sunair (HF).

Re: Spectra mount questions

Post by kc7gr »

Both control head (if using an A9) and the radio itself use a 10-32 thread.

Happy mounting.
Image
Bruce Lane, KC7GR
"Raf tras spintern. Raf tras spoit."
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Spectra mount questions

Post by Will »

The mounting screws are M5 X 10 part number 03 80114M02. Most if not all late Motorola mobiles use this screw, Maxtrac, GM, CDM, ect.
akardam
Posts: 2251
Joined: Thu Mar 04, 2004 10:53 am

Re: Spectra mount questions

Post by akardam »

Pretty much any good local hardware store should have a selection of metric screws that you could use in lieu of the ones from Motorola. Other than the thumbscrews for the speakers all my radios and heads are mounted with metric hardware.
User avatar
crazyboy
Posts: 373
Joined: Fri Aug 27, 2004 10:29 am

Re: Spectra mount questions

Post by crazyboy »

Thank you guys, greatly appreciate it.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”