R2600 squelch part

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
john9912
New User
Posts: 88
Joined: Fri Aug 08, 2008 9:13 am

R2600 squelch part

Post by john9912 »

I have an R2600 monitor that I knocked something into the front and broke the knob and shaft of the squelch pot. I need to replace the squelch pot and knob. I called parts ID, they gave me a p/n of GG3330475C001 for the knob which looks OK. They gave me a p/n of GG4026821A001 for the squelch pot. When I try to order it, it comes up as SPDT switch. Doesn't sound right.

Does anyone have the correct part # for squelch pot?

Thanks.
John L.
Sparta NJ
Top
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: R2600 squelch part

Post by DJP126 »

john9912 wrote:I have an R2600 monitor that I knocked something into the front and broke the knob and shaft of the squelch pot. I need to replace the squelch pot and knob. I called parts ID, they gave me a p/n of GG3330475C001 for the knob which looks OK. They gave me a p/n of GG4026821A001 for the squelch pot. When I try to order it, it comes up as SPDT switch. Doesn't sound right.

Does anyone have the correct part # for squelch pot?

Thanks.
John L.
Sparta NJ
John,

I don't have an R2600 manual so I don't have the part numbers however the knob should start out as GG36 not GG33 and the pot should start out as GG18 (that is IF going by the standard parts format for the old Government Electronics Division of Motorola). Have a Happy New Year.
Dave
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”