MinIII 1 channel started scanning

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
bjlf
Posts: 51
Joined: Thu Sep 13, 2001 4:00 pm

MinIII 1 channel started scanning

Post by bjlf »

I had 1 of my firefighter give me his pager last night.
Said he had been getting the NOAA flash flood warnings as well as the local PD for about 12 hours.
He was still getting our tones

Pager is on 155.145

PD is 155.580
I don't know NOAA off hand

Any Ideas?

I know I am sending it in for repair, just wondering how/why?
Lake Effect
Posts: 311
Joined: Tue Dec 06, 2005 9:47 am

Re: MinIII 1 channel started scanning

Post by Lake Effect »

I would suspect you have the loose pin on the PLL chip on the receiver board.


http://batboard.batlabs.com/viewtopic.php?f=12&t=80272


That is the first, and usually last, place I look when someone says they hear NOAA station.

L.E.
Post Reply

Return to “Motorola Digital and Voice Paging”