Name this console...
Moderator: Queue Moderator
Name this console...
Hey Guys...
I don't have a clue who makes these consoles as they have no stickers on them... Can you identify what type this is so I can buy some faceplates? (Bonus points if your a dealer and have good pricing on 'em).
Thanks,
Alex
(PS Sorry for the crappy image.)
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Re: Name this console...
Well, perhaps you can work on a better pic or pics but going by what I see(which aint much)
it reminds me of a Havis-Shields console as it is very squared off and boxy looking and it also
seems to have the bolts at the bottom which I think is the way they attach to the mounting
trays.
it reminds me of a Havis-Shields console as it is very squared off and boxy looking and it also
seems to have the bolts at the bottom which I think is the way they attach to the mounting
trays.
fineshot1
NJ USA
NJ USA
Re: Name this console...
Well, this one just has a channel which has a bunch of bolts in it that run the length of the channel. You move the bolt to where you want to lock down the bracket, and drop the screw in.
I was almost thinking Havis, but don't know well enough.
I can take a better photo tonight, but I was hoping someone would recognize the channel.
-Alex
I was almost thinking Havis, but don't know well enough.
I can take a better photo tonight, but I was hoping someone would recognize the channel.
-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Re: Name this console...
Ok, it was pointed out to me via IM that it's probably a Havis C Series console...
I need to get 4 CDM brackets, 2 A/W7 dash mount brackets, and a couple of Vertex brackets, but I have no idea what model [yet].
If you can help me out - drop me a PM.
I need to get 4 CDM brackets, 2 A/W7 dash mount brackets, and a couple of Vertex brackets, but I have no idea what model [yet].
If you can help me out - drop me a PM.
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
-
- Posts: 100
- Joined: Sun Jan 27, 2008 6:48 am
- What radios do you own?: Quantar/AS/A-spec./VertexP25
Re: Name this console...
Alex last I knew Havis-Troy-Jotto faces all interchanged just the material and thickness is "slightly" different. I believe you could use any of them. FYI this may be a lesser known company called Stuart-stewart someting to that effect
Jeff
Jeff
Re: Name this console...
Yeah, we are using a mismash of plates. We found a solution that will work, it's a bit of a pain, but it'll work.
Thanks guys....
-Alex
Thanks guys....
-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.