Ive called Motorola Parts ID, and no luck, we cant determine where they came from, and our supply is dwindling, so we need help figuring out where these brackets were used, and what the part number is.
They are DEK brackets, but they have the L shaped Jog in them. The top has the round hole with the slotted holes above, then the bottom has the plastic spacer with the grooves...
Any help would be appreciated!
Help ID'ing these brackets....
Moderator: Queue Moderator
-
- New User
- Posts: 18
- Joined: Sun May 17, 2009 10:03 am
- transistor747
- Batboard $upporter
- Posts: 155
- Joined: Wed Jan 26, 2005 2:46 pm
Re: Help ID'ing these brackets....
Seems to me that those were used with System 90 (Micor mobile) to stack control head modules.
I can't help with a part # however.
I can't help with a part # however.
"The state of the art may well have exceeded the state of the need"
Re: Help ID'ing these brackets....
If memory serves, those were used to mount a DEK to an A/B/C/W-4/5/7 control head, as the mounting bracket one of those heads is narrower than the DEK mounting (which is the same as an A/B/C/W9). I do not have a part number handy, alas.
Re: Help ID'ing these brackets....
Motorola Part Numbers from the DEK Control Head Manual:
07-02114Z01 and 07-02114Z02 for the left and right mounting bracket used to mount dek to a4/a5/a7 head.
07-02114Z01 and 07-02114Z02 for the left and right mounting bracket used to mount dek to a4/a5/a7 head.
Keith Dobbins N8KLD
IT Mainframe Network Engineer
W8TAP Repeater Group
Repeater Technician
Parkersburg, WV
IT Mainframe Network Engineer
W8TAP Repeater Group
Repeater Technician
Parkersburg, WV
Re: Help ID'ing these brackets....
Correct part numbers.
Not sure if they are still available though, can't log into MOL right now.
Not sure if they are still available though, can't log into MOL right now.