Hi,all
a apx7000 upgrade newer fimware , radio flashed SEC HW Update in Progress then reboot
but still display :SEC HW Update in Progress once again ,more times ,what's wrong? any idea?
thx!
apx7000 upgrade failure
Moderator: Queue Moderator
-
- Posts: 211
- Joined: Wed Aug 04, 2010 7:49 pm
-
- Posts: 211
- Joined: Wed Aug 04, 2010 7:49 pm
Re: apx7000 upgrade failure
SSE5000ASTRO wrote:Hi,all
a apx7000 upgrade newer fimware , radio flashed SEC HW Update in Progress then reboot
but still display :SEC HW Update in Progress once again ,more times ,what's wrong? any idea?
thx!
all R02 ,R04 and R05 FW be used ,but still abnormal ,always dispaly : SEC HW Update in Progress then reboot.
Re: apx7000 upgrade failure
i bet that your radio does not have a MACE chip on the board.
that would be a non-recoverable error i think.
congratulations on your paperweight.
doug
that would be a non-recoverable error i think.
congratulations on your paperweight.
doug
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
-
- Posts: 211
- Joined: Wed Aug 04, 2010 7:49 pm
Re: apx7000 upgrade failure
batdude wrote:i bet that your radio does not have a MACE chip on the board.
that would be a non-recoverable error i think.
congratulations on your paperweight.
doug
oh,man,what is MACE chip? can get from aftermarket? show me some details pls,Thanks.
Re: apx7000 upgrade failure
I have a buddy who was going to do this, Please let me know what you find out so I can pass this on to him before he does the update
Re: apx7000 upgrade failure
Didn't the APXes have this showing after an upgrade around R3 firmware, when MACE was put in the software? Didn't the radio need another few minutes hooked up to the computer to finish the secure upgrade?
Re: apx7000 upgrade failure
escomm wrote:Didn't the APXes have this showing after an upgrade around R3 firmware, when MACE was put in the software? Didn't the radio need another few minutes hooked up to the computer to finish the secure upgrade?
This is true. It takes a few more minutes when there is a firmware bump to the MACE. I think what Doug was pointing out was that some early prototype APX's made it out into the wild without the MACE chip. These radios may have a cataclysmic issue with later firmware upgrades.
http://csrc.nist.gov/groups/STM/cmvp/do ... sp1274.pdf
Marshall