Hi all,
Suppose I have an APX portable or mobile that's currently flashed with VHF and 7/800 bands. Could this radio be reflashed to swap the 7/800 with one of the UHF ranges?
Thanks,
Reflash APX for different band?
Moderator: Queue Moderator
Reflash APX for different band?
The bandsplit is only a suggestion.
Re: Reflash APX for different band?
In theory I suppose if you change the band split specific items (quick check shows RF boards are different for the diff combinations but I didn't check further for other parts) it would be possible to blast it with new info.
Jason
Jason
Re: Reflash APX for different band?
Thanks Jason. I was just wondering if the parts were band-specific or if the hardware was capable of doing all the splits and the limits were just controlled in software...
The bandsplit is only a suggestion.
-
- Posts: 211
- Joined: Wed Aug 04, 2010 7:49 pm
Re: Reflash APX for different band?
Impossible! hardware is different.
-
- Posts: 613
- Joined: Sat Jun 26, 2004 3:35 pm
Re: Reflash APX for different band?
The RF sections ARE band-specific, that is why when you order an APX7000 you have to specify the secondary band even if you don't enable it. If you chose to enable dual-band operation, it's $1,000 list additional.
"TDMA = digital and same great taste, half the bits"