havis console questions.
Moderator: Queue Moderator
-
- Posts: 318
- Joined: Wed Nov 19, 2008 12:48 pm
- What radios do you own?: Astro Spectra Spectra Maratrac
havis console questions.
Or just questions about consoles in general.
the first question is about the mounting plates.
Are they interchangeable or are they limited by brand or specific type of console?
would a jotto faceplate work in a havis console with minimal modifications?
would it be easier to home brew a faceplate?
where would the best place to look for faceplates for a havis consolidator?
Thanks
paul
the first question is about the mounting plates.
Are they interchangeable or are they limited by brand or specific type of console?
would a jotto faceplate work in a havis console with minimal modifications?
would it be easier to home brew a faceplate?
where would the best place to look for faceplates for a havis consolidator?
Thanks
paul
just call me dos impaired.... lol
-
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: havis console questions.
Jotto and Troy faceplates are interchangeable. Havis is not. If you try to use a Jotto/Troy faceplate in a Havis console it will be too narrow.
Dan (ka8ypy) can order anything from the Havis catalog; just shoot him a message.
Dan (ka8ypy) can order anything from the Havis catalog; just shoot him a message.
- smokeybehr
- Posts: 114
- Joined: Wed Jun 20, 2007 4:07 pm
- What radios do you own?: Dozens. Want one? Email me.
Re: havis console questions.
The difference between the Havis and Jotto/Troy faceplates is about 1/8". The holes are about 1/16" wider on the Havis.
I just learned this when test fitting my Troy faceplates to the Havis console that I just acquired.
I just learned this when test fitting my Troy faceplates to the Havis console that I just acquired.
No, I will not fix your computer. Call back during NORMAL business hours.
-
- Posts: 318
- Joined: Wed Nov 19, 2008 12:48 pm
- What radios do you own?: Astro Spectra Spectra Maratrac
Re: havis console questions.
So I could take my havis console, cut 1/8 and inch out of the middle and weld it back up again so the troy/jotto stuff would work.... sounds easy enough....lol
just call me dos impaired.... lol
-
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: havis console questions.
Or you could just order the correct Havis faceplates, instead of doing it the hard way?
I don't recall there being a significant price difference between Jotto and Havis hardware.. in fact IIRC Jotto faceplates are more expensive.
I don't recall there being a significant price difference between Jotto and Havis hardware.. in fact IIRC Jotto faceplates are more expensive.
-
- Posts: 318
- Joined: Wed Nov 19, 2008 12:48 pm
- What radios do you own?: Astro Spectra Spectra Maratrac
Re: havis console questions.
I was just being a wiseass.... i have some face plates on the way that i got off ebay but the seller did not know if they were havis or troy. they were cheap enough. i am still waiting for one i purchased here two months ago that i know fits but that seller seems to be hiding now.
just call me dos impaired.... lol
-
- Posts: 318
- Joined: Wed Nov 19, 2008 12:48 pm
- What radios do you own?: Astro Spectra Spectra Maratrac
Re: havis console questions.
well the faceplates i got off of ebay were listed as troy but fit my havis perfectly.
they did have in the description that they were unsure if they were havis or troy so now i have more maxtrac mounts than i can use...lol.
they did have in the description that they were unsure if they were havis or troy so now i have more maxtrac mounts than i can use...lol.
just call me dos impaired.... lol
- sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
Re: havis console questions.
What other mounts do you need?kb2crk wrote:well the faceplates i got off of ebay were listed as troy but fit my havis perfectly.
they did have in the description that they were unsure if they were havis or troy so now i have more maxtrac mounts than i can use...lol.
Seth
-
- Posts: 318
- Joined: Wed Nov 19, 2008 12:48 pm
- What radios do you own?: Astro Spectra Spectra Maratrac
Re: havis console questions.
as of right now i am trying to figure out what i can fit in the console. i may be looking for one or two for an a7 maratrac head and dek. it all depends on how many maxtracs i plan to squeeze in. I have some measuring to do tomorrow when im not at work.
just call me dos impaired.... lol
- sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
Re: havis console questions.
ah those I dont havekb2crk wrote:as of right now i am trying to figure out what i can fit in the console. i may be looking for one or two for an a7 maratrac head and dek. it all depends on how many maxtracs i plan to squeeze in. I have some measuring to do tomorrow when im not at work.
sorry man.
If you go with a remote or dash mount spectra, i have brackets.
Seth
-
- Posts: 318
- Joined: Wed Nov 19, 2008 12:48 pm
- What radios do you own?: Astro Spectra Spectra Maratrac
Re: havis console questions.
I have one dash mount spectra but i may use it as a base radio. my remote mount spectra is an a3. from what i have heard the a9 head spectra remote is the same size, shape and mounting as the a7 maratrac.
just call me dos impaired.... lol
- sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
Re: havis console questions.
it is but the brackets i have are for your a4/5/7kb2crk wrote:I have one dash mount spectra but i may use it as a base radio. my remote mount spectra is an a3. from what i have heard the a9 head spectra remote is the same size, shape and mounting as the a7 maratrac.
if you can use them, I can send it out...Im me if you want
Seth