Enabling Capacity Plus
Moderator: Queue Moderator
Enabling Capacity Plus
I know MOTOTRBO repeaters need a license key of some sort to enable Capacity Plus, but how about mobiles and portables? What does the option cost?
-
- Posts: 930
- Joined: Fri Jun 23, 2006 11:21 am
Re: Enabling Capacity Plus
Capacity Plus is free on subscribers that have digital in them so as long as you don't have a analog only unit you should be good.
- MSS-Dave
- Posts: 770
- Joined: Mon Jun 30, 2003 6:02 pm
- What radios do you own?: XTL5K, NX300, PD782, Spark Gap
Re: Enabling Capacity Plus
Yep but from what I see you buy the option for the repeater then you have to submit S/N of the mobiles and portables to download the key for them. Option price for the repeater is $1667.00 USD list.
Re: Enabling Capacity Plus
ConnectPlus, however, requires a hardware board as well as a software entitlement
Re: Enabling Capacity Plus
No, S/N's of mobiles and portables are not required.MSS-Dave wrote:Yep but from what I see you buy the option for the repeater then you have to submit S/N of the mobiles and portables to download the key for them. Option price for the repeater is $1667.00 USD list.
We just did a Capacity Plus upgrade this week. Bought the option. An Entitlement ID (EID) was sent to it. It was entered into the CPS along with the codeplug for the repeater. Option was enabled for the repeater.
We then programmed the mobiles and portables without requirement for an additional activation. Easy.