Astro Saber

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
KC2TJS
Posts: 37
Joined: Tue Dec 30, 2008 3:41 pm

Astro Saber

Post by KC2TJS »

I'm trying to program a narrowband recieve only channel 460.475 Nac 7F3. RX only won't let you change the channel spacing from 25Khz to 12.5Khz. I'm using Astro Saber & XTS 3000 CPS Software R05.03.00 to program the radio.
Top
User avatar
wx4cbh
Posts: 337
Joined: Tue Aug 05, 2003 6:01 pm

Re: Astro Saber

Post by wx4cbh »

Don't enable "RX only" until you are done with setting all the parameters. Disable the "RX function," set your parameters, then enable "RX only."
curmudgeon.....and I like it.
Top
KC2TJS
Posts: 37
Joined: Tue Dec 30, 2008 3:41 pm

Re: Astro Saber

Post by KC2TJS »

Thanks, I will give that a try.
Top
Post Reply

Return to “Radio Programming”