XTL5000 wont tx or rx TMS with xts5000 & xts2500

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
shadowman
Posts: 93
Joined: Thu Mar 27, 2008 1:36 am

XTL5000 wont tx or rx TMS with xts5000 & xts2500

Post by shadowman »

gday all, im having a problem with my text messaging on my 03 handheld control mic hi power XTL5000 ... i can sms flawlessly between my handhelds (xts5000 and xts2500s) but when i try to send to my xtl5000 or send from the xtl5000 it wont work . i have checked all the settings regarding ip's and so on and they are fine but it just wont work ? could this be a firmware drama.. my xts5000 firmware is 09.00.00 and my xts2500s are 12.00.00 .. the XTL5000 has R15 ... any help with this would be greatly appreciated as id like to be able to sms from my car to surrounding portables and vice versa ... it is driving me nuts . thanks to all who take the time to read my message and try and help me work this pain out :)
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: XTL5000 wont tx or rx TMS with xts5000 & xts2500

Post by escomm »

Post your flashcode please
Bigfella237
Posts: 152
Joined: Wed May 02, 2012 11:30 am

Re: XTL5000 wont tx or rx TMS with xts5000 & xts2500

Post by Bigfella237 »

Is packet data encrypted in some of the radios and not others?

In whichever Conventional Personality you're using (or all of them) "Secure II” tab change Packet Data's Secure/Clear Strapping to “Clear”

Or if that option is not able to be changed, you must go to the “Conventional > ASTRO Systems > ASTRO Configuration > Radio Wide” tab and un-tick “Secure Packet Data by Default”, then return and clear the above?

Andrew
shadowman
Posts: 93
Joined: Thu Mar 27, 2008 1:36 am

Re: XTL5000 wont tx or rx TMS with xts5000 & xts2500

Post by shadowman »

hi all, the xtl2500 mobile, xts5000 and 2500 portables have no drama what so ever communicating to one another. in the conventional personality the in secure II tab the voice key strapping is set to select as i have a button to turn secure on and off. but the packet data tab i am not able to change . i go to the astro configuration and the secure packet data tab is blanked out? im unsure whats going on ..gday all . 588288-001E84-9 is the flashcode of the xtl5000 that wont tx or rx any texts to any of the portables or the xtl2500. cheers all.
588288-001E84-9 works out to this below

Flashcode 1
588288-001E84-9
XTL5000 Flashcode 2

Flashcode 3

Flashcode 4


D12 B1 G806
G806 ASTRO IMBE Digital Operation
D12 B3 G114
G114 Enhanced Digital ID Display
D11 B4 G298
G298 Hardware Multikey Encryption w/ OTAR
D10 B4 G683
G683 Trunked One Touch Status Message
D9 B2 W12
W12 Preamp
D8 B4 G996
G996 Over the Air Provisioning
D7 B4 G51
G51 SmartZone Systems Operation
D4 B1 W947
W947 Packet Data Interface
D3 B2 G387
G387 Conventional Voting Scan
D3 B3 G173
G173 SmartZone Omnilink MultiZone Operation
D3 B4 G182
G182 Radio Control Protocol
D2 B4 G361
G361 ASTRO 25 9600 Baud Trunking
D1 B3 G193
G193 ADP Software Encryption
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”