I'm working with a group of UHF MagOne BPR40 radios, attempting to reprogram the fleet for the narrow banding deadline. All but one of the radios are in daily service at a remote location (ski area), so I'm attempting to get a master unit programmed then clone the remainder in an overnight/end-of-duty-day session. (I'm not a subscriber to RVN5081, so I have to deliver the master unit to a local com shop). I was successful in doing something similar a year ago (added a new simplex channel due to reconfiguration of other equipment). However, I've run into a stumbling block this time.
Utilizing the same cloning cable and procedure from a year ago, the cloning process fails (three different slaves attempted, same result across all, no mod to the slaves, and yes, the master is operating correctly from a TX/RX side, I've verified against a couple of other units (Wouxun) I own which are programmed with the new narrow banding and modified TPL configuration.) Anyone have some hints for where to go with debugging? One concern I noted at the time the master was programmed, the tech was tapping the space bar of his computer, wondering why the cursor of the CPS wasn't moving between fields, and all of these spaces were entered into the PASSWORD field. I asked if he should clear that out, but he said it shouldn't matter (no other characters in the PASSWORD field, and we have never previously used one).
Suggestions?
- Board index General Radio Programming
- Search
-
- It is currently Thu May 23, 2024 6:11 am
- All times are UTC-08:00
MagOne BPR40 Cloning Issues
This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.
Moderator: Queue Moderator
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base