Min III, Will this work?
Moderator: Queue Moderator
Min III, Will this work?
Looking to purchase a Minitor III, with a Split of 450-457.999, and going to try and program it to 458,750, will this work? If not, any way to override? Thanks, KC2PAP
Re: Min III, Will this work?
I did not have a UHF Minitor III to try this on, but we did have a couple of new Minitor IV's, 2-freq. with Stored Voice, 450-457.999, in the inventory, so I tried programming 458.750 into one of them.
The standard software, both Windows and DOS versions, would not let me go above 458.675. This would be the same on a Minitor III. Maybe one of the software guys knows how to force things up to 458.750
Since you are wanting a 450-458 model but need 458.750 also, I am assuming that you want 2-frequency operation with the other channel in the normal 450-458 range. You may need to consider a Minitor V in the 453 to 462 band split. That model will program down to 452.300, hopefully your other frequency is above 452.300.
Or, you may need to consider the tried and true Minitor II. That will definitely work.
If you are interested in new Minitor IV's, 2-freq with Stored Voice, 450-457.999, we have two.
Hope this helps!
Bob CLARKCOMLR at aol dot com
The standard software, both Windows and DOS versions, would not let me go above 458.675. This would be the same on a Minitor III. Maybe one of the software guys knows how to force things up to 458.750
Since you are wanting a 450-458 model but need 458.750 also, I am assuming that you want 2-frequency operation with the other channel in the normal 450-458 range. You may need to consider a Minitor V in the 453 to 462 band split. That model will program down to 452.300, hopefully your other frequency is above 452.300.
Or, you may need to consider the tried and true Minitor II. That will definitely work.
If you are interested in new Minitor IV's, 2-freq with Stored Voice, 450-457.999, we have two.
Hope this helps!
Bob CLARKCOMLR at aol dot com
Re: Min III, Will this work?
If you have the Windows PPS just enter into the engineering mode (the password is the capital city of Taiwan) and change the band split.kc2pap wrote:Looking to purchase a Minitor III, with a Split of 450-457.999, and going to try and program it to 458,750, will this work? If not, any way to override? Thanks, KC2PAP
Jim
Re: Min III, Will this work?
Thanks for the Replies.
Only looking for a one Frequency Model, not Two. Found one on Fleabay for a good price, and was looking to bid on it, but didn't know if it was going to work or not.
If anyone on here has the programmer, and can program it to 458.750, Please PM me and We can Discuss.
Thank you -KC2PAP
Only looking for a one Frequency Model, not Two. Found one on Fleabay for a good price, and was looking to bid on it, but didn't know if it was going to work or not.
If anyone on here has the programmer, and can program it to 458.750, Please PM me and We can Discuss.
Thank you -KC2PAP
Re: Min III, Will this work?
I am not trying ti hi-jack the thread, but I found these pagers also, and can the 464-469 ones go down to 462.975? I looked at all of the pagers and none seem to cover this band split, any ideas? In the engineer mode, how do you get there, and will it hurt the performance of the pager? Thanks,
-Ed
-Ed
Ed
- Mikey
- Posts: 410
- Joined: Wed Sep 05, 2001 4:00 pm
- What radios do you own?: CDM1550 LS+, HT1250, MCS2000
Re: Min III, Will this work?
I'm With Jim on this one, i have went into the engineering mode of a couple of pagers and changed the band split and it worked with no sensativity issues or anything. Been working for almost 2 years now this way without any problems.
Mike
Mike
Re: Min III, Will this work?
How do you enter the engineering mode for a Minitor 4 pager? I need to change the band split.
- Mikey
- Posts: 410
- Joined: Wed Sep 05, 2001 4:00 pm
- What radios do you own?: CDM1550 LS+, HT1250, MCS2000
Re: Min III, Will this work?
the capital of Taiwan is taipei
Re: Min III, Will this work?
and a proper noun (such as the name of a city) should always be capitalizedMikey wrote:the capital of Taiwan is taipei
- Mikey
- Posts: 410
- Joined: Wed Sep 05, 2001 4:00 pm
- What radios do you own?: CDM1550 LS+, HT1250, MCS2000
Re: Min III, Will this work?
This is true, but when being used as a Password, its not capitalized.
Re: Min III, Will this work?
You sure? I'm ~100% positive that it is.....in the Min IV PPS.Mikey wrote:This is true, but when being used as a Password, its not capitalized.
- Mikey
- Posts: 410
- Joined: Wed Sep 05, 2001 4:00 pm
- What radios do you own?: CDM1550 LS+, HT1250, MCS2000
Re: Min III, Will this work?
awwwp, yout totaly right!!!! Sorry I havent used that for so long, i just tried it and it does need to be Cap'd.
Mikey
Mikey