Okay, here is a fun one...
I am trying to take the audio output from a APX 7000 and pipe it to the microphone input for a ht 1250.
Then I want to take the audio output from the 1250 and send it to the mic of the APX.
I need to set it up so VOX is enabled both ways. (Either through a ptt signal sent with audio, or programming on the radio itself.)
The endgame is to be able to transmit on the uhf band and have it simucast to the trunked system, and vice versa. (Is the proper term a cross-band repeater?)
I have the adapter for the 1250 that provides a 3.5 mm jack and 2.5 mm jack, but there is no comparable part for the APX that I can find.
I came across the hirose adapter, and found a pinout diagram here. http://batboard.batlabs.com/viewtopic.php?t=52801.
So I am trying to figure our a way to wire the hirose adapter to a 3.5 and a 2.5 jack. (Or if there is a better way to do what I am attempting, please enlighten me!)
I have the software to program the 1250, but not the APX. I can have the APX programmed if anyone can provide the specifics of what needs to be programmed.
Thanks in advance for the assistance!
- Board index General General Motorola Solutions & Legacy Radio Discussion
- Search
-
- It is currently Thu May 23, 2024 6:30 am
- All times are UTC-08:00
Connecting APX 7000 and HT 1250
The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
Moderator: Queue Moderator
Return to “General Motorola Solutions & Legacy Radio Discussion”
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base