I have a Motorola CDM1550 wired to a Zetron tone remote 250, which is in turn wired to a Zetron tone remote 284, all in the same room as a bit of a lab set up.
Can someone please confirm whether or not I am correct in my assumption that when this set-up is powered up that I should have comms between a (Motorola HT1250) handheld and the tone remote 284 when they both have the same channel selected?
comms between radio/console and handheld
Moderator: Queue Moderator
- kb4mdz
- Posts: 282
- Joined: Tue Oct 02, 2001 4:00 pm
- What radios do you own?: Too many for the time I have.
Re: comms between radio/console and handheld
Yes, you should, assuming everything is connected correctly.
Sorry, don't mean to sound snarky or anything, but we've all had brainfarts ocasionaally, right?
The 284 is a 4-line remote, isn't it (been a while)? I forget how it comes up on POR; or don't you have to tell it which lines to automatically select?
2 wire operation? Got the right pair?
And does the CDM1550 RX & TX with the handheld OK?
Sorry, don't mean to sound snarky or anything, but we've all had brainfarts ocasionaally, right?
The 284 is a 4-line remote, isn't it (been a while)? I forget how it comes up on POR; or don't you have to tell it which lines to automatically select?
2 wire operation? Got the right pair?
And does the CDM1550 RX & TX with the handheld OK?