Page 1 of 1
XPR4350 with 4 deskmics
Posted: Fri Apr 20, 2012 10:47 am
by johnny1225
I have a customer that has a mototrbo system already in place. They have one XPR4350 Mobile that is strapped to a wall. What they want is to use this one base station with (4) deskmics (1) mic for each desk. What would be the best way to hook up such a request from a customer.....
Regards
John
Re: XPR4350 with 4 deskmics
Posted: Fri Apr 20, 2012 11:11 am
by com501
4 mics in parallel to the rear connector.
Use the deskmic for the CDM, so you don't have strange connector issues.
Re: XPR4350 with 4 deskmics
Posted: Fri Apr 20, 2012 7:49 pm
by RFguy
Cut the jumpers in the desk mics to ensure the mics TX audio is switched (that is if the new style mics have this functionality).
Re: XPR4350 with 4 deskmics
Posted: Fri Apr 20, 2012 9:02 pm
by com501
The new style mics are not hot until you key them.